Digga North America Mini Soil Conditioner with Hydraulic Pivot

Description

Prepare clean seedbeds and pulverize hard dirt clods with the Digga Mini Soil Conditioner on compact loaders. Sized at 48in drum width, this attachment features hydraulic angle pivoting to windrow rocks aside. Tungsten carbide teeth grade soil. Operating on steep slopes requires balanced loader counterweight to keep front tracks grounded.

Welded high-tensile steel builds the 48in wide rotor frame, reinforced with ASTM A36 plate side wings. A high-torque hydraulic motor couples to an internal drive hub, operating on 10 to 25 GPM auxiliary flow up to 3,000 PSI. 72 tungsten carbide teeth spin on the rotor drum. Unboxed tool weight measures 540 lbs, with storage stance measuring 54in wide by 42in long by 26in high in machinery storage yards.

Key Features of Digga PR-480018

Grounds maintenance contractors buy Digga PR-480018 soil conditioners to grade lawns and remove gravel without manual raking. Equipment pricing provides commercial ground preparation performance that transforms rocky soil into clean planting seedbeds in single passes.

• Hydraulic bi-directional angle cylinder pivots the drum 25 degrees left or right.
• Direct drive hydraulic motor generates high rotor torque without drive chain maintenance.
• Full 48in rotor drum width matches narrow compact track loader machine tracks.
• 72 tungsten carbide teeth pulverize packed hardpan and tear out stubborn turf roots.
• Adjustable urethane side shields control soil containment and side windrow drift spillover.
• Dual solid rubber gauge wheels set fine grading depth from 0in to 3in.
• Universal mini skid steer hitch plate mounts to standard mini loader arms.
• Hydraulic crossover relief valve protects the motor from sudden underground rock strikes.

Hydraulic Rotor Torque Benchmark

Bench testing confirms the hydraulic drive motor sustains 420 ft-lbs of rotor torque at 15 GPM and 2,800 PSI fluid pressure. The 48in drum spins at 220 RPM under full grading load with minimal speed drop. The hydraulic pivot cylinder angles the frame across a 50-degree total arc in 3.5 seconds. Internal relief valves bypass fluid at 3,100 PSI during boulder impacts to stop motor stall. Hydraulic fluid temperature rise stabilizes at 38°F above ambient reservoir fluid levels.

Loader Hydraulic Rig Limits

Engaging loader auxiliary hydraulics spins the rotor drum to break tough clay crust. Do not operate this conditioner on mini loaders with hydraulic flow below 10 GPM or pressure below 2,000 PSI because inadequate oil flow will stall the rotor in heavy rock soils.

• Grease drum end bearings and pivot pins with NLGI 2 lithium grease every 10 hours.
• Inspect tungsten carbide teeth for impact chipping and replace worn teeth every 40 hours.
• Check hydraulic hoses and quick disconnect couplers for leaks or abrasion every 25 hours.

Factory Warranty Package Manifest

Digga North America covers the mini soil conditioner with a 1-Year commercial warranty against manufacturing defects and structural steel failures. The freight pallet shipment includes the 48in soil conditioner, hydraulic hoses with flat-face couplers, universal mini hitch plate, and complete technical operator equipment manual.