Land Pride 72 Inch SPL 10 Series Loader Snow Pusher for Kubota 20-45HP Tractors

Description

Formed 10-gauge structural sheet steel reinforces the Land Pride SPL1072 Snow Pusher for compact tractor loaders. Sized at 72in wide, this pusher pairs with Kubota and utility loaders between 20HP and 45HP. Universal quick-attach mounts connect to loader arms. The fixed box profile contains snow volume but prevents angled windrow plowing down road shoulders.

Formed 10-gauge steel makes up the 72in curved moldboard, reinforced with heavy ASTM A36 plate side panels and support gussets. Skid shoes mount along the side wings to regulate bottom scraping clearance. The pusher operates with zero hydraulic hoses, PTO gearboxes, or electrical cables to shift snow. Unboxed implement weight measures 310 lbs, with floor storage stance measuring 76in wide by 34in deep by 28in high inside tractor implement sheds.

Key Features of Land Pride SPL1072

Commercial contractors buy Land Pride SPL1072 pushers to clear church parking lots and commercial walkways with compact tractors. Equipment pricing provides high-capacity snow containment without the expense of powered mechanical blowers.

• Wide 72in curved moldboard rolls deep snowdrifts forward to maximize loader bucket capacity.
• Heavy 3/16in steel side wings prevent snow trails from spilling past blade edges.
• Reversible AR400 high-carbon steel cutting edge scrapes packed ice down to solid asphalt.
• Universal skid steer quick-attach plate hooks direct to compact loader arms in seconds.
• Formed side skid shoes adjust cutting clearance over broken pavement and gravel.
• Welded structural corner gussets prevent side plate spread under heavy wet snow loads.
• Mechanical box design requires zero hydraulic fluid, valve maintenance, or electrical wiring.

Loader Forward Thrust Testing

Bench hydraulic testing verifies the 72in loader pusher withstands 5,800 lbs of continuous forward push thrust from a 40HP tractor without moldboard buckling. The side wing skid shoes resist 2,200 lbs of side curb impact force before showing 0.025in structural deflection. AR400 cutting edge blades display less than 0.012in wear after 60 hours of continuous asphalt scraping. Decibel output matches ambient tractor engine sound. Powder coat paint resists rust after 800 hours of continuous salt spray testing.

Loader Tonnage Setup Guidelines

Loader operators must level the front hitch plate to maintain equal ground contact across both side skid shoes. Do not mount this pusher on heavy wheel loaders or tractors over 45HP because excessive machine mass will fold the 10-gauge moldboard on curb impacts.

• Inspect side skid shoes for bottom wear and replace plates before side panels scrape pavement.
• Check cutting edge plow bolts and torque nuts to 55 ft-lbs every 25 hours.
• Rinse corrosive deicing salt chemicals from all steel surfaces after commercial clearing jobs.

Factory Warranty Crate Contents

Land Pride covers the steel box moldboard, side plates, and weld seams with a 1-Year commercial warranty. The pallet shipment contains the complete 72in pusher assembly, universal loader quick-attach plate, AR400 scraper edge, adjustable skid shoes, and complete operator equipment documentation.