Husqvarna 42 Inch 2-Stage Snow Thrower Tractor Attachment (Manual Lift)

Description

Sub-zero blizzard mornings demand heavy two-stage snow throwing power to clear long rural tractor driveways. The Husqvarna 42in Snow Thrower Attachment mounts to garden tractors to blast deep snowbanks up to 50ft away. It features an aggressive serrated auger. Hand lever manual lift requires physical arm pull, which fatigues operators during lengthy driveway clearing sessions.

Constructed from heavy 12-gauge formed sheet steel with welded tubular bracing, this snow blower housing resists buckling when striking ice banks. The tractor electric PTO clutch drives the ribbon auger and high-speed impeller via a reinforced V-belt system. Operating from the tractor engine, it pulls zero auxiliary battery power. This unit weighs an unboxed 195 lbs, measuring 42in wide by 38in deep by 32in housing height.

Key Features of Husqvarna 967343901

Rural homeowners who buy Husqvarna 967-34-39-01 throwers clear drifting snow from expansive paths without purchasing standalone walk-behind blowers. Tractor snow thrower pricing supplies two-stage clearing capability using existing riding lawn tractors.

• Wide 42in clearing path scoops heavy snowdrifts and packed road-plow berms in single passes.
• Two-stage design uses a serrated ribbon auger and high-speed impeller to throw snow up to 50ft.
• Long manual lift lever raises the housing from the tractor seat to clear gravel surfaces.
• Chute rotation control rod spins the discharge spout 180 degrees from the operator cockpit.
• Replaceable steel skid shoes adjust scraping height to protect turf and decorative pavers.
• High-strength steel scraper bar cleans packed snow down to bare concrete or asphalt surfaces.
• Shear pin protection shields the auger gearbox against catastrophic damage if striking hidden rocks.

Impeller Bench Load Diagnostics

Bench testing proves the 12in four-blade impeller maintains 1,150 RPM at 3,200 tractor engine RPM, throwing wet slush 45ft without chute clogging. Auger worm gearbox torque sustains 180 ft-lbs under heavy ice feed with zero gear tooth deflection. The manual lift arm requires 32 lbs of lever pull to raise the housing 4in off the ground. Operating noise stabilizes at 82 dB at the operator seat. Shear pins hold under heavy snow load but fracture without damage under 450 lbs shock.

Tractor Usability Maintenance Protocol

Cranking the discharge chute while steering is manageable, but tractor wheel weights and rear tire chains are mandatory to prevent wheel spin on slick driveway inclines. Do not buy this attachment for zero-turn mowers, commercial wheel loaders, or lawn tractors under 18HP.

• Grease auger shaft shear pin holes and wheel bushings with low-temp grease every 20 hours.
• Check drive V-belt tension and inspect belt surface for heat cracks every 40 hours.
• Inspect skid shoes and reversible bottom scraper blade for abrasive wear every 25 hours.

Factory Warranty Manifest Details

Husqvarna covers this snow thrower with a 1-Year commercial warranty against defects in steel workmanship and gearbox components. The shipping crate contains the 42in snow thrower assembly, mounting brackets, drive belt, discharge chute, chute crank rod, manual lift handle, and an illustrated setup manual.