Marv Haugen 96in Snow Bucket Medium

Description

High-strength ASTM A36 plate steel construction forms a high-capacity scoop that moves heavy wet snow. The Marv Haugen 96in Snow Bucket clears parking lots and farm access roads with maximum volumetric capacity. Its tall profile contains drift pack. Pushing heavy drifts taxes loader traction and burns fuel fast, requiring solid ballasting on ice-covered pavement.

Formed with 3/16in steel plate and reinforced with 1/2in thick bottom wear runners, this bucket halts shell gouging and bottom wear. Operating without hydraulic motors or valves, it draws zero fluid from loader circuits. The unboxed bucket weighs 820 lbs, featuring a shop floor stance measuring 96in wide by 40in deep by 34in high. The heavy universal quick-attach plate fits all standard skid steer loaders.

Key Features of Marv Haugen MMSB-96

Snow removal contractors who buy Marv Haugen MMSB-96 buckets move massive drifts and light bulk materials fast. Competitive commercial snow bucket pricing provides heavy-duty clearing volume for skid steer operators and commercial parking lot fleets.

• High-volume 96in scoop capacity clears wide paths across commercial parking surfaces in fewer passes.
• Reinforced 3/16in steel side plates resist bending when scraping against curbs and hidden snowbanks.
• Reversible high-carbon steel 3/4in by 6in cutting edge doubles blade life before replacement.
• Bottom wear runners protect the bucket belly against friction abrasion from rough asphalt.
• Universal skid steer quick-attach plate allows instant mounting onto standard loader hitches.
• High back design prevents wet snow from rolling over the rear onto loader lift cylinders.
• Formed top rail adds torsional stiffness to stop bucket bowing under heavy ice loads.

Structural Bench Load Diagnostics

Bench diagnostics verify the 96in bucket supports a 3,500 lb static load across the front cutting edge with less than 0.018in center beam deflection. The bolt-on cutting edge sustains 4,500 lbs of lateral shear force against frozen pack without fastener loosening. Shell welds withstand repeated sub-zero cold flex tests down to minus 30°F without seam cracking. Backplate squareness remains within 0.002in across the universal quick-attach receiver tabs under load. Operating noise registers 0 dB at rest.

Field Usability Maintenance Protocol

The deep bucket pocket carries light snow, wood shavings, and sawdust with ease, but filling this large volume with dense wet gravel will overload compact skid steers. Do not buy this bucket for rock quarry excavation, concrete demolition, or skid steers with under 60HP lift capacity.

• Inspect bolt-on cutting edge plow bolts and torque to 220 ft-lbs every 40 hours.
• Check universal quick-attach latch tabs and weld seams for deformation every 50 hours.
• Clean inside bucket surfaces and coat with rust inhibitor before warm season storage.

Factory Warranty Manifest Details

Marv Haugen warrants this snow bucket with a 1-Year commercial warranty covering structural steel and weld integrity. The shipping pallet includes the factory-assembled 96in snow bucket, reversible high-carbon bolt-on cutting edge with plow bolts, pre-installed universal quick-attach plate, and a field maintenance guide.