Baileigh HSP-30M-C H-Frame Press 30 Ton and 10 Ton Hydraulic

Description

Feel the controlled power of dual hydraulic cylinders handling heavy straightening and delicate broaching on one frame. The Baileigh HSP-30M-C Dual Hydraulic Press integrates a 30 Ton main cylinder with a secondary 10 Ton high-speed ram. It broadens workshop capacity. Two separate manual hand pumps demand physical arm movement, which slows down high-repetition assembly operations.

Heavy plate ASTM A36 structural steel forms an extra-wide H-frame chassis to support both cylinder mounts without frame deflection. Dual manual hydraulic hand pumps power the cylinders on separate circuits without electrical connections or power drops. This unique press weighs an unboxed 480 lbs, occupying a floor stance measuring 42in wide by 28in deep by 72in high. Anchor holes in the base channels permit floor bolting.

Key Features of Baileigh HSP-30M-C

Toolroom machinists who buy Baileigh HSP-30M-C presses broach small keyways and press heavy drive gears on one workstation. Innovative dual-tonnage commercial press pricing gives maintenance cells flexibility without purchasing two separate machines.

• Primary 30 Ton hydraulic ram exerts heavy thrust for large wheel bearings and stubborn shafts.
• Secondary 10 Ton hydraulic ram provides fast travel and sensitive control for small broaching tasks.
• Independent hydraulic hand pumps let operators choose the ideal force profile for each job.
• Hand crank winch lifts and lowers the wide steel bolster across multiple vertical positions.
• Dual top-mounted liquid pressure gauges monitor tonnage readings across both hydraulic circuits.
• High-tensile steel frame pins secure the wide bed against heavy eccentric pressing forces.
• Industrial hard-chrome plated rams resist grit abrasion and hydraulic seal wear.
• Two heavy steel V-blocks support irregular round parts during pressing procedures.

Dual Cylinder Bench Load Diagnostics

Bench diagnostics confirm the 30 Ton cylinder holds full pressure for 15 minutes with less than 20 PSI drop, while the 10 Ton cylinder holds pressure with under 15 PSI drop. Ram stroke travel spans 6in on both cylinders, with TIR runout remaining under 0.0006in. Bed bolster deflection holds at 0.010in across a 34in span under full 30 Ton center load. The 10 Ton ram advances 0.15in per pump stroke, providing rapid approach. Safety bypass valves crack at 32 Ton and 11 Ton.

Shop Usability Maintenance Protocol

Operators select between the 30 Ton and 10 Ton cylinders based on workpiece scale, though manual pumping requires physical strength during deep broach passes. Do not buy this press for automated blanking, high-speed stamping, or shops requiring motorized electric hydraulic rams.

• Clean both cylinder chrome rods and inspect rod wipers for fluid weeping every 20 hours.
• Grease winch cable, guide pulleys, and bolster pin holes every 50 hours.
• Check pump reservoir levels and top up with clean ISO 46 oil every 6 months.

Baileigh Warranty Manifest Details

Baileigh protects this dual-ram press with a 1-Year parts warranty and lifetime technical support. The wooden shipping crate holds the assembled HSP-30M-C frame, 30 Ton cylinder, 10 Ton cylinder, dual manual pumps, cable winch assembly, two steel V-blocks, bolster pins, and an operator guide.