Ranger R980DP-L 110VAC Swing Arm Tire Changer with Dual-Tower Assist

Description

Wired for standard 110V electrical outlets, the Ranger R980DP-L 110V Tire Changer provides high-capacity dual-assist wheel servicing without expensive electrical panel upgrades. It clamps 30in rims and tames low-profile run-flat tires, though continuous heavy-load bead spinning draws a full 15A circuit that must remain dedicated to this machine.

Heavy-gauge plate steel forms the rigid vertical post and welded chassis to stop frame deflection under heavy assist loads. A high-torque 2HP electric motor draws 15A at 110V to spin the turntable at 7 RPM in forward and reverse. The unboxed tool weighs 885 lbs, requiring anchor placement across a floor stance measuring 58in deep by 52in wide. Hardened steel reduction gears transmit drive power.

Key Features of Ranger R980DP-L

Independent repair shops buy Ranger R980DP-L tire machines to service custom wheels on standard shop power while keeping equipment pricing in budget. The dual pneumatic assist arms restrain stubborn tire beads without rim damage.

• Dual pneumatic assist towers apply 900 lbs downward thrust to mount stiff sidewalls.
• Large turntable clamps hold wheel diameters from 10in to 30in for maximum fleet coverage.
• The standard 110V 2HP electric motor plugs into standard commercial wall receptacles.
• A pneumatic side bead breaker generates 6,600 lbs of breaking force at 140 PSI air line pressure.
• A traveling bead roller follows wheel rotation to push beads into rim drop centers.
• Replaceable nylon mount head inserts stop scratches on painted and polished aluminum wheels.
• Pneumatic foot pedals provide tactile operator control over table rotation and jaw clamping.

Bench Tested Torque Deflection Ratings

Load testing shows the main vertical column deflects under 0.014in under 900 lbs assist arm thrust. Turntable spindle axial runout remains within 0.003in TIR under a 170 lbs custom wheel load. Operating sound levels reach 72 dB during turntable rotation, while the 110V motor temperature stabilizes at 126°F after demounting thirty-five truck tires in succession. Bead breaker stroke travel completes in 2.7 seconds at 125 PSI airline pressure, delivering repeatable side force through its heavy return spring.

Shop Handling Maintenance Schedule

Dual assist control joysticks require 8 lbs hand force for smooth arm movement. Do not buy this machine for low-power extension cords or mobile service vans with small underpowered generators.

• Add ISO 32 air tool lubricant to the airline lubricator reservoir every 40 hours of use.
• Grease the vertical guide shafts on both assist towers with NLGI 2 grease every 30 days.
• Torque the concrete anchor bolts to 95 ft-lbs every 6 months to stop chassis shake.

Warranty Coverage Manifest Details

Ranger backs this 110V dual-assist machine with a 1-Year commercial warranty covering structural components and electric motors. The unboxed shipping crate includes the tire machine, dual assist towers, bead pressing arms, tire lever, plastic mount head protectors, air lubricator, and a technical shop manual.