Milton 5:1 Eco Series Pump Kit IBC with Hose and Preset Meter

Description

Pneumatic pistons multiply plant air to drive viscous gear oils through the Milton 5:1 Eco Preset Pump Kit on intermediate bulk containers. This package automates tote evacuation using a mechanical preset meter that shuts off at target volumes, though dispensing cold SAE 140 fluid slows meter turbine rotation.

Ductile cast aluminum encases the upper reciprocating air motor, coupled to a cold-drawn carbon steel lower displacement cylinder. Operating on 70 PSI to 145 PSI compressed air, the 5:1 pressure ratio generates 725 PSI fluid discharge pressure. The unboxed assembly weighs 50 lbs, establishing an IBC stance measuring 18in wide by 24in deep. Resilient NBR packings stop fluid leakage during continuous transfer duty.

Key Features of Milton ZE1730K-IBC-300

Lube technicians buy Milton ZE1730K-IBC-300 packages to automate bulk oil fills while keeping shop capital pricing under control. This pneumatic kit transfers transmission fluids, gear oils, and hydraulic lubricants.

• A 5:1 fluid pressure ratio outputs up to 3.7 GPM for dependable viscous oil dispensing.
• The mechanical preset meter halts flow when fluid reaches the selected target volume.
• A 13ft oil-resistant rubber delivery hose withstands rough shop concrete abrasion.
• The formed steel IBC bracket fastens onto intermediate bulk container cage pipes.
• A 41in carbon steel suction pipe draws oil from container bottom sumps.
• A balanced handle trigger includes a lock latch for uninterrupted fluid dispensing.
• An automatic non-drip nozzle tip prevents oily drips on vehicle engine components.

Bench Tested Flow Measurement Ratings

Flow bench verification records volume cutoff precision within 0.07 quarts across multiple five-quart batch dispenses with SAE 80W-90 gear lubricant. Fluid output reaches 3.2 GPM through the 13ft hose at 100 PSI inlet air. Deadhead fluid pressure seals hold 700 PSI static pressure without seat bypass. Operating sound levels reach 74 dB during continuous stroke cycling. The internal air shuttle valve shifts without hesitation down to 25 PSI supply pressure under steady backpressure.

Shop Usability Maintenance Guidelines

The preset control dial turns with 3 lbs hand force to set target volume batches. Do not buy this fluid pump for volatile fuels, corrosive chemical acids, or water-based solvents.

• Add 5 drops of ISO 22 air tool lubricant into the inlet port every 40 hours of use.
• Calibrate the mechanical preset meter against a graduated container every 30 days.
• Torque the IBC cage mounting bracket bolts to 25 ft-lbs every 6 months.

Warranty Coverage Package Manifest Inclusions

Milton covers this Eco Series dispensing package with a 1-Year commercial warranty against material defects. The unboxed kit contains the 5:1 pneumatic stub pump, mechanical preset control meter, 13ft rubber oil hose, suction down-tube, IBC tote bracket, bung fitting, and an illustrated technician setup manual.