Milton 3:1 Eco Series Pump IBC with Reel and Nozzle

Description

Dispense bulk motor oil across multi-bay fleet shops with the Milton 3:1 Eco IBC Reel Pump package. This pneumatic kit taps 275-gallon and 330-gallon totes to discharge lubricant through a 50ft hose reel, though cold 90-weight gear lubricants will reduce discharge volume through the extended reel spool assembly.

Die-cast aluminum forms the upper pneumatic motor body while cold-drawn carbon steel tubing encases the wetted fluid displacement section. Operating on 70 PSI to 115 PSI shop air, the motor produces 345 PSI line pressure. Unboxed kit weight totals 98 lbs, occupying an IBC side stance measuring 26in wide by 32in deep. Polyurethane dynamic seals prevent fluid migration across high-cycle pressure chambers.

Key Features of Milton ZE1700K-IBC-400

Fleet operations buy Milton ZE1700K-IBC-400 packages to centralize vehicle crankcase servicing while maintaining sensible shop hardware pricing. The setup handles motor oils, automatic transmission fluid, and hydraulic oils.

• The 3:1 pressure ratio air motor outputs up to 7.4 GPM for fast crankcase fills.
• A heavy single-arm steel reel stores 50ft of 1/2in medium-pressure oil hose off shop floors.
• The manual dispense nozzle features a non-drip tip to stop puddle formation on garage floors.
• The formed steel IBC bracket mounts onto intermediate bulk container cage tubes.
• A 41in carbon steel suction down-tube draws oil from the container bottom sump.
• The hose reel guide arm adjusts to multiple angles for easy overhead hose pullout.
• A balanced handle trigger includes a lock latch for uninterrupted fluid dispensing.

Bench Tested Flow Reel Parameters

Flow bench verification tests using SAE 10W-30 oil record 5.2 GPM output through the 50ft hose reel at 100 PSI inlet air. The fluid piston sustains 340 PSI static deadhead pressure without seat bypass. Operating sound levels reach 72 dB next to the exhaust port under full stroke duty. The hose reel spring holds 32 lbs pull resistance at complete extension without ratchet slippage. Motor body temperature drops 4°F during continuous 60-gallon bulk dispense runs.

Shop Handling Maintenance Protocol

The nozzle trigger actuates with 4 lbs finger pull force, allowing fine volume modulation into engine valve cover ports. Do not buy this unit for volatile gasoline, corrosive paint thinners, or high-viscosity axle greases.

• Add 5 drops of ISO 22 air tool lubricant into the inlet port every 40 hours of use.
• Inspect hose reel ratchet teeth and guide rollers for wear every 30 days.
• Torque the IBC cage mounting bracket bolts to 25 ft-lbs every 6 months.

Warranty Coverage Pallet Inclusions

Milton covers this Eco Series dispensing package with a 1-Year commercial defect warranty. The unboxed shipping crate includes the 3:1 pneumatic stub pump, 50ft hose reel, manual dispense nozzle, steel suction pipe, IBC bracket, 2in bung adapter, connecting hoses, and an illustrated installation guide.