Sawstop Compact Table Saw

Description

Bulky cabinet saws cannot fit inside service vans, leaving remote trim carpenters without precision table saw capability. The Sawstop Compact Table Saw delivers patented flesh-sensing safety in an ultra-portable 15-ampere benchtop chassis spinning at 4000 RPM. This compact table saw requires a dedicated 120-volt outlet and cannot accept stacked dado blades due to its short arbor shaft.

The structural chassis utilizes a heavy-duty steel roll cage paired with a precision-machined aluminum table surface to resist jobsite drops. A high-output universal motor couples to the carbon steel arbor through sealed deep-groove ball bearings, suppressing runout during continuous timber rips. The integrated safety detection module monitors blade capacitance, firing a replaceable aluminum brake cartridge that stops the blade within five milliseconds of flesh contact.

Compact Safety Saw Matrix

A rack and pinion fence system glides smoothly across steel gear tracks to maintain parallel alignment up to 24-1/2 inches. Upfront controls feature quick-tilt blade bevel adjustments and a paddle-style safety power switch.

• 15-ampere 120-volt motor delivers 4000 RPM blade speed for smooth crosscuts and rip passes
• Patented Sawstop safety system arrests spinning blade within five milliseconds of skin contact
• Rack and pinion fence mechanism eliminates lateral play across 24-1/2-inch rip capacity cuts
• Quick-tilt bevel system allows one-handed angle adjustments between zero and forty-five degrees
• Compact benchtop chassis weighs under sixty pounds for easy single-mechanic jobsite transit
• Integrated storage compartment holds miter gauge, rip fence, push stick, and blade wrenches
• All-metal internal trunnion assembly maintains arbor alignment under heavy lumber feed forces

Dyno Bench Load Telemetry

Bench testing on a 120-volt 15-amp circuit confirms 14.4 amperes current draw during 2×4 framing lumber rips. Arbor rotational speed settles at 3760 RPM from a 4015 RPM free-spin baseline under manual feed. Arbor shaft runout measures less than 0.0013 inches total indicator reading at the blade collar. Motor casing temperature rises 36 degrees Fahrenheit across twenty minutes of continuous ripping. Operating noise emissions register 93 dBA at the operator position.

Service Rules Application Bounds

This compact table saw requires grounded electrical circuits to prevent capacitive sensor errors from disabling the safety brake. Woodworkers must not attempt installing stacked dado sets on this machine because the arbor length supports single blades only. Avoid ripping wet conductive timber without activating the electronic bypass mode first.

• Check brake cartridge gap against the blade perimeter using the onboard yellow gauge weekly.
• Clean fine sawdust from rack and pinion fence gears using dry compressed shop air.
• Wipe aluminum tabletop with paste wax to reduce friction and inhibit moisture oxidation.
• Check fence squareness against the miter slot with a machinist square after vehicle transport.
• Blow fine sawdust out of the internal motor cooling vents after every heavy ripping shift.

Commercial Warranty In-Box Contents

Sawstop backs this compact table saw with a 1-Year limited warranty covering electrical components and mechanical drive assemblies. The boxed inventory includes the Compact Table Saw, 10-inch carbide blade, standard brake cartridge, rack-and-pinion fence, miter gauge, push stick, blade wrenches, and operator manual.