Rubi Tools DT-10IN MAX 120V 60HZ 10 Inch Tile Saw

Description

Built to satisfy OSHA water-management rules, the Rubi DT-10IN MAX Tile Saw slices thick porcelain pavers and granite slabs without throwing overspray. Its plunge-capable head handles 3-1/2in material in a single pass. While the roll-in water tray speeds cleanout, the 90 lbs plastic and metal frame requires stable footing on uneven jobsite subfloors.

Formed from aluminum casting and reinforced composite components, this saw minimizes haul weight without compromising rail stiffness. A 1.5HP 120V 60Hz universal direct-drive motor draws 15A, spinning the 5/8in arbor at 4,000 RPM with high torque reserve. Machine weight without water totals 90 lbs. The operating bench stance measures 38in long by 26in wide, providing a compact floor stance on standard folding stands or workbench stations.

Key Features of Rubi 26994

Flooring contractors buy Rubi 26994 saws to rip large format porcelain. Commercial tile setters check market pricing to outfit crews with low-mess cutting stations.

• The 1.5HP direct-drive motor generates 15A torque to slice through dense 3/4in porcelain tile without bogging.
• A plunging cutting head permits internal cutouts for plumbing stub-outs and electrical floor boxes.
• The sliding aluminum table runs on sealed stainless bearings to hold straight cuts across 36in tiles.
• A water containment system channels spray into rear collection trays to keep jobsite interiors clean.
• Adjustable miter stops lock at 22.5 and 45 degrees for fast trim cutting on baseboards.
• A thermal overload breaker shuts off power if motor windings encounter excessive feed resistance.
• The folding scissor stand features transport wheels for simple single-worker rolling through standard commercial doorways.

Arbor Tolerances Plunge Cut Evaluation

Diagnostic bench evaluation on 24in vitreous porcelain pavers confirms razor-sharp cut edges without edge chipping. Spindle runout measures 0.0003in TIR at the blade collar, ensuring uniform diamond rim wear. Under steady ripping of dense 2cm outdoor pavers at 2 FPM, the 120V motor draws 13.8A without trip breaker events, maintaining a steady operating pitch at 78 dB. Internal motor temperatures level out at 122°F after three continuous hours of wet cutting. The sliding guide rail maintains zero lateral play under side loads.

Wet Saw Handling Preventive Maintenance

The sliding cart glides with under 2 lbs push effort, while the plunging head detent releases with 5 lbs hand pressure. Do not use this wet tile saw for dry masonry cutting or large-scale concrete road demolition beyond its 3-1/2in cut envelope.

• Clean sediment sludge from water pump intake screens and trays after every 8 hours of sawing.
• Wipe stainless table guide rails and apply light silicone spray every 40 hours.
• Check arbor nut torque and inspect blade flange faces for grit every 30 days.

Crate Inclusions Factory Warranty Coverage

Rubi provides a 2-Year limited warranty covering defects in factory materials. The product package includes the DT-10IN MAX tile saw, folding scissor wheel stand, 10in diamond blade, submersible water pump, side extension table, miter gauge, angle guide, water tray assembly, and operator instructions.