RIKON 14In Open Stand Bandsaw

Description

Blade flutter and frame flex cause crooked cuts through thick hardwood boards on lightweight stamped bandsaws. The RIKON 14In Open Stand Bandsaw delivers reliable resaw capacity using a rigid steel column and precision blade guides. The open steel leg stand requires floor bolting or ballast weights to eliminate light cabinet resonance under heavy timber feeding.

A heavy-gauge welded steel frame holds tension on resaw bands without structural flexing under continuous spring loads. The 1.5 HP induction motor transfers rotational torque to balanced cast iron band wheels via an industrial poly-v drive belt. Double ball bearing blade guides support the blade above and below the precision-ground cast iron table, preventing band twist and wandering cuts across thirteen-inch hardwood blanks.

Open Stand Bandsaw Hardware Metrics

Woodworking joinery shops require rigid beam tension to slice architectural veneers without blade wander or surface washboarding. Large ground cast tables support heavy timber burls without tipping or frame deflection.

• 1.5 HP dual-voltage induction motor operates on 115 or 230-volt wiring to supply reliable cutting torque
• Two blade speeds of 1445 and 2950 feet per minute accommodate diverse wood species and composite boards
• 13-5/8-inch throat capacity and thirteen inches of resaw height clear wide boards and decorative veneer blanks
• Ground cast iron table tilts 45 degrees right and 5 degrees left on rigid machined trunnion mounts
• Precision ball bearing blade guides control lateral band wander both above and below the work table
• Balanced cast iron band wheels provide rotational inertia to maintain constant band speed
• Integrated dust collection port channels chips into shop vacuum hoses to keep wheel tracks clean

Bench Load Telemetry Amperage Draw

The motor pulls 5.4 amps at idle when wired for standard 115-volt line power. Slicing through ten-inch kiln-dried walnut stock elevates current draw to 12.8 amps while band speed holds steady at 2950 feet per minute. Table surface flatness tests within 0.002 inches across the entire ground casting. Sound emissions hold at 73 dBA under full cutting friction, ensuring a quiet workshop environment.

Field Service Trade-Offs Application Filter

Do not use this woodworking bandsaw to slice structural carbon steel bars, iron pipe, or masonry blocks. Operators who leave wide resaw bands under high tension overnight flatten the polyurethane wheel tires and warp steel bands. Release blade tension using the quick-release lever at the end of each work shift. Clean tree pitch off the guide bearings using mineral spirits once each week. Inspect wheel brush bristles to ensure chip clearing from drive tires.

Warranty Protection Standard Package Items

A 5-Year limited warranty covers mechanical chassis components, induction motor windings, and cast iron table. The package contains the 14-inch bandsaw unit, open steel floor stand, wood cutting band, miter gauge, rip fence, and assembly hardware.