Milwaukee M18 FUEL 6 1/2 Plunge Track Saw Kit 106inch Guide Rail with Clamps Bundle

Description

Splintered veneer edges and cord trip hazards ruin expensive walnut panel installations when sizing sheet goods on table saws. The Milwaukee M18 FUEL 6 1/2 plunge track saw kit delivers splinter-free panel division along a 106-inch extruded rail. The continuous 106-inch aluminum rail demands careful van storage to prevent edge bending during transit across rough construction jobsites.

A high-performance brushless motor routes direct current from an 18-volt battery pack, delivering rotational torque to helical cut carbon steel gears housed in an aluminum gear case. The magnesium base plate features adjustable track-glide cams that eliminate carriage wobble along guide rail channels. A spring-loaded plunge mechanism pivots on ground steel hinge pins, while an anti-splinter shoe holds wood fibers flat against the veneer surface.

Plunge Track Saw Hardware Metrics

Cabinetmakers dividing high-gloss veneers demand dead-straight score lines without edge chipping along the cut path. Zero-clearance guide tracks establish true blade kerf placement on both sides of the cut.

• 18-volt brushless motor delivers variable speeds between 2500 and 5600 RPM for clean cuts in panels
• 106-inch continuous extruded aluminum guide rail delivers dead-straight cuts across eight-foot sheets
• 6-1/2-inch carbide blade cuts 2-1/4 inches deep at ninety degrees to clear stacked panel materials
• Scoring cut stop sets an initial 1 mm depth pass to eliminate veneer face blowout on fine woods
• Overlapping plunge guard design permits cuts as close as 1/2-inch away from vertical wall partitions
• Track-adjustment cams seat inside the magnesium saw base to eliminate lateral carriage slop along rails
• 6.0 Ah high-output battery delivers sustained current discharge through low-resistance cell connections

Bench Load Telemetry Amperage Draw

Under free-spin rotation at maximum speed, the brushless motor draws 3.4 amps DC from the 18-volt platform. Plunging through three-quarter industrial melamine sheets elevates battery discharge current to 24.8 amps while motor velocity holds at 4980 RPM. Guide track lateral play measures under 0.001 inches when adjusted with onboard cams. Sound emissions peak at 84 dBA under full cutting load.

Field Service Trade-Offs Application Filter

Do not use this track saw for rough timber framing or demolition cutting through concrete-embedded lumber. Inexperienced operators who force the plunge head downward before full motor RPM chip carbide teeth on dense composite cores. Wipe aluminum track sliding channels with a clean dry microfiber towel before setting the saw carriage. Replace the rubber splinter guard strip when changing blade kerf widths. Store tracks flat inside protective cases.

Warranty Protection Standard Package Items

A 5-Year limited warranty covers the track saw chassis while a 3-Year warranty protects the battery pack. The bundle includes the 6-1/2-inch track saw, 106-inch guide rail, track clamps, 6.0 Ah battery, rapid charger, carbide blade, and contractor storage bag.