DEWALT 12 Inch 15-Amp Single Bevel Compound Miter Saw with Compact Miter Saw Stand Bundle

Description

Laser cut-line drift and loose bevel detents ruin expensive architectural trim joints on custom finish builds. The DEWALT 12 Inch 15-Amp Single bevel compound miter saw bundle delivers high-capacity chop cutting on a compact folding stand. Non-sliding chop arms restrict horizontal cut width to eight inches, preventing single-pass crosscutting of wide stair tread stock.

A fifteen-amp universal motor mounts perpendicular to the arbor, transmitting rotational force through hardened alloy steel helical gears that minimize drivetrain backlash. The cast aluminum base table incorporates a stainless steel miter detent plate with machined lock notches that eliminate angular movement. Dual steel tubular beams on the compact folding stand support extendable material stop brackets that hold long trim boards flat without sagging.

Single Bevel Compound Miter Parameters

Finish carpenters demand dead-true angle cuts and rigid material support when trimming long architectural baseboards. Machined fence castings support tall vertical moldings without flexing under downward clamping pressure.

• 15-amp electric motor spins 12-inch blades at 4000 RPM to make crisp chip-free cuts in brittle trim
• Stainless steel miter detent plate features fourteen positive stops to speed up repetitive angle setups
• Tall sliding fences support 5-1/2-inch vertical baseboard molding against the machined rear stop
• Single bevel capacity tilts 48 degrees left with positive stops at common crown molding angles
• Compact folding stand supports up to five hundred pounds while collapsing down for vehicle transport
• Extendable support arms span up to five feet to support long lumber planks without tipping
• Integrated dust port collects waste chips directly behind the blade shroud to keep shop air clean

Bench Load Telemetry Amperage Draw

Idle rotation draws 5.8 amps on standard 120-volt branch circuits. Chopping through five-quarter hard maple elevates current demand to 14.1 amps while blade speed dips from 4000 RPM down to 3420 RPM. Stand beam deflection measures under 0.020 inches under fifty pounds of lumber weight at full extension. Sound emissions peak at 93 dBA during high-feed hardwood crosscuts, requiring operator hearing protection.

Field Service Trade-Offs Application Filter

Do not use this compound miter saw for structural steel cold cutting or heavy timber framing. Rough laborers who drop dimensional lumber onto the aluminum table wings crack the cast miter detent plate. Blow wood dust out of the miter detent slots with dry compressed air each week. Check fence-to-blade squareness with a machinist square after moving the folding stand. Lubricate stand leg hinge pins with dry silicone spray once per month.

Warranty Protection Standard Package Items

A 3-Year limited warranty includes one year of free service and ninety days money back. The bundle contains the 12-inch single-bevel miter saw, DWX724 compact folding stand, 12-inch carbide blade, material clamp, and blade wrench.