Festool CT 25/ETS 125/GR US Starter Sanding Set with Sander and Dust Extractor

Description

Inadequate dust collection clogs sandpaper discs and leaves toxic fine wood flour floating inside small cabinet shops. The Festool CT 25 ETS 125 starter sanding set pairs a five-inch eccentric sander with a commercial twenty-five-liter dust extractor. This 250-watt finishing tool features a two-millimeter stroke for ultra-fine surface preparation. Forcing the small pad flat into deep inside corners damages backing pad edges.

An industrial universal motor wet-end powers a precision-ground eccentric spindle mounted inside double-shielded ball bearings. High-load needle roller bearings stabilize the rotor shaft, eliminating radial play under aggressive laminate feed pressures. The front bearing plate is cast from ductile aluminum to disperse friction heat away from the pad arbor. Sintered bronze guide bushings support the orbital counterbalance assembly to eliminate harmonic vibration.

Starter Finishing Hardware Matrix

The twenty-five-liter container volume handles high-volume sanding dust production across full commercial cabinet finishing shifts. A compact five-inch sander chassis provides balanced one-handed control along vertical face frames and door edges.

• 250-watt industrial motor maintains spindle speed through fine hardwoods without chatter marks or surface burn
• Two-millimeter orbit stroke produces microscopic scratch patterns that disappear under thin lacquer coats
• Five-inch multi-hole backing pad maximizes airflow extraction to prevent abrasive paper loading and heat buildup
• Twenty-five-liter capacity dust extractor container accommodates high-volume sanding dust without frequent bag changes
• Internal bypass cooling draws clean air across the extractor motor to prevent thermal shutdown under load
• Modular storage dock latches Systainer tool cases flat to the extractor top for organized shop transport
• Antistatic suction hose routes sanding dust straight to fleece filter bags with point-three micron retention

Precision Sanding Bench Telemetry

Testing records free-spindle velocity at 12,000 RPM, maintaining 10,400 RPM under continuous five-pound downward surface sanding load. Baseline pneumatic orbital sander comparison matches an air motor demand of 13.5 CFM at 90 PSI dynamic through three-eighths-inch lines. Noise meter testing records 72 dBA at operator ear level during fine pine edge sanding. Motor casing temperatures climb twenty-two degrees Fahrenheit above ambient across thirty minutes of joinery work. Spindle drive output generates 1.8 foot-pounds of rotational sanding torque.

Fleet Service Practical Directives

Do not assign this precision compact sander to heavy fiberglass grinding, concrete surfacing, or automotive frame stripping. Low-stroke orbital motion cannot remove thick mill scale and burns through abrasive hook-and-loop backing pads rapidly. Operating with packed dust extraction bags restricts airflow, blowing fine wood dust back into motor windings.

• Replace the fleece filter bag before dust accumulation exceeds eighty percent of total container capacity.
• Blow dry compressed air through motor intake grilles to remove fine airborne sawdust particles.
• Inspect the five-inch backing pad for edge tears or hook degradation before mounting fresh abrasive discs.

Warranty Statement Package Inventory

Festool covers this starter sanding bundle with a 3-Year comprehensive warranty covering wear parts and motor electronics upon online product registration. The package contains one ETS 125 REQ sander, CT 25 dust extractor, suction hose, backing pad, edge protector, filter bag, and instruction manual.