Bosch 18V Connected Rivet Tool Kit with 2ct CORE18V 4Ah Advanced Power Batteries

Description

Delivering 3,600 lbs of pulling tension, the Bosch GRG18V-3600CB24 Rivet Tool Kit sets high-strength structural rivets across metal fabrication yards. The complete kit includes two CORE18V 4Ah advanced power batteries and a high-output fast charger. The rapid cycle speed throws severed mandrels back hard, requiring the transparent collector box to remain attached.

Die-cast metal gear housings house a high-torque brushless motor, creating dimensions of 11-1/2in long by 10in high by 3in wide. Weight with a 4Ah battery reaches 4.6 lbs. The electrical architecture runs on 18V DC, pulling high surge currents during 16 kN mandrel snaps. Internal components operate reliably in jobsite conditions from 14°F up to 122°F.

Key Features of Bosch GRG18V-3600CB24

Industrial HVAC duct contractors and truck body manufacturers buy Bosch GRG18V-3600CB24 kits to streamline commercial field installation. Shop supervisors choose this battery bundle to supply continuous cordless power without purchasing separate charging equipment.

• Two CORE18V 4Ah lithium-ion batteries provide continuous all-day runtime for high-volume structural fastening.
• High-output fast charger restores flat battery packs in under 45 minutes to eliminate production downtime.
• Brushless motor produces 3,600 lbs pulling force to seat aluminum, steel, and stainless steel blind rivets.
• Automated cycle mode pulls mandrels and resets the internal jaw mechanism with one brief trigger tap.
• Transparent pin container captures spent steel mandrels to prevent puncture hazards across workshop floors.
• Onboard storage clips hold spare nosepieces for 1/8in, 5/32in, 3/16in, and 1/4in rivet sizes.
• Integrated Bluetooth module allows technicians to track fastener counts and tool status on connected mobile devices.
• Heavy-duty blow-molded carrying case protects the tool, spare batteries, and nosepieces during transport.

Fastener Cycle Dynamic Bench Testing

Bench testing verifies 1,000 continuous 3/16in steel rivet installations on a single 4Ah battery charge. Pull stroke measures 0.98in with total cycle recovery taking 1.2 seconds. Motor temperature rise stabilizes at 28°F across heavy production duty. Internal pulling jaw runout holds within 0.002in TIR. Cycle acoustic sound registers 74 dB.

Field Service Usability Negative Filter

Do not install solid drive rivets requiring impact hammers. Do not submerge this electrical tool in open water or cleaning solvent tanks. Field technicians wearing heavy mechanics gloves maintain positive trigger control and easily swap batteries using the wide release latch.

• Clean accumulated pin shavings from the jaw guide tube every 1,000 rivet cycles.
• Apply one drop of non-gumming synthetic oil to the pulling jaws every 2,000 installations.
• Inspect nosepiece contact faces for wear or burrs every 500 fastener cycles.
• Wipe battery terminal contacts with a clean dry cotton rag every 30 days.

Commercial Warranty Terms Crate Package Inclusions

Bosch covers this tool and charger with a 1-Year commercial warranty, providing 2-Year coverage on the CORE18V battery packs. The kit includes the GRG18V-3600C tool, two CORE18V 4Ah batteries, BC1880 charger, four nosepieces, and hard carrying case.