Milton 3/8 Inch x 50 Ft Pressure Washer Hose Reel with Single Wire Braided Hose

Description

Wrangling stiff, pressurized washdown lines across muddy equipment yards damages hose covers and wastes labor time. The Milton 3/8 Inch x 50 Ft pressure washer reel manages 5000 PSI washdown lines with 50 feet of wire-braided hose. Terminated with 3/8-inch NPT fittings, it handles commercial cleaning. The swivel seal leaks if operators yank hose past stop points.

Milton constructs this high-pressure reel from heavy-gauge stamped steel finished with a corrosion-resistant powder coat. The high-pressure fluid circuit incorporates a stainless steel internal shaft paired with a machined brass swivel and high-temperature Viton packings. An enclosed tempered steel clock spring delivers balanced recoil energy into the drum. Four non-snag guide rollers route the wire-braided hose, protecting the rubber cover from steel edge cuts during side pulls.

Field Hardware Performance Matrix

Heavy machinery wash bays and commercial detailing trailers demand high-pressure hose storage that endures hot water and harsh detergents. Heavy steel construction and high-grade wire-braided rubber maintain pressure washer output under intense field conditions.

• 50-foot 3/8-inch inner diameter single wire-braided rubber hose handles operating pressures up to 5000 PSI.
• High-temperature Viton swivel packings withstand continuous hot water washdown temperatures up to 210°F.
• 3/8-inch male NPT connection fittings mate with commercial pressure washer wands and quick-connect couplers.
• Stainless steel fluid shaft resists corrosion from harsh fleet detergents and pressure washer chemicals.
• Multi-position locking ratchet mechanism secures line payout at selected lengths to eliminate operator pull fatigue.
• Dual-arm stamped steel pedestal base mounts to trailer decks, wash bay walls, or pressure washer frames.
• Solid rubber adjustable hose bumper stop maintains wand coupler access at comfortable reach levels.

Dyno Load Realities Heat Data

Under dyno flow testing with a 4000 PSI pressure washer at 4.0 GPM, the reel exhibits a minor 45 PSI pressure loss across the 50-foot hose. Fluid temperature spikes to 200°F cause the brass swivel housing to reach 142°F in 75°F shop air. Pull-force testing measures 9.0 pounds of initial extraction effort, climbing to 18.0 pounds at full extension. The internal spring canister sustains 8000 consecutive recoil cycles without loss of spring tension. Retraction noise checks in at 64 dBA.

Field Service Application Limits

Weighing 38 pounds with hose installed, securing this reel requires four 3/8-inch grade 5 bolts into structural trailer framing. Do not use this hose reel for transferring gasoline, motor oil, or pneumatic air tools. Running compressed air through high-pressure water hose creates dangerous hose whipping risks if punctures occur.

• Flush the fluid swivel with fresh water after using chemical soaps to prevent detergent buildup on seals.
• Inspect the outer hose cover for exposed wire braid wear before starting high-pressure wash shifts.
• Check base mounting bolts for proper torque every 250 operating hours on mobile pressure trailers.

Commercial Warranty Package Inventory

Milton protects this pressure washer hose reel with a 1-Year commercial warranty covering material defects and factory workmanship. The product carton contains the complete steel reel, 50 feet of installed single wire-braided 5000 PSI hose, a high-pressure brass swivel, an adjustable hose stop, and an illustrated installation guide.