Milton Hose Reel 3/8in ID x 50′ EPDM Hose with 1/4in NPT

Description

Air hose dry rot and swivel leakage cripple shop productivity during busy service shifts. The Milton Hose Reel 3/8in ID unit delivers 50 feet of factory-installed EPDM rubber line for commercial bays. Rated at 300 PSI, it feeds standard pneumatic impact tools. The single stamped arm requires rigid backing to prevent lateral deflection.

The reel frame uses heavy-gauge stamped steel treated with a corrosion-resistant powder coat finish to survive humid wash environments. Air passes through a solid brass full-flow external swivel fitted with nitrile packings, preventing pneumatic restriction under continuous rotation. A cold-rolled solid steel center shaft turns inside precision sealed bearings. Retraction torque comes from a containerized steel clock spring motor, calibrated to retrieve flexible EPDM rubber hose across thousands of cycles without spring binding.

EPDM Pneumatic Hardware Matrix Data

Fleet truck garages need durable, pre-plumbed air reels that resist temperature extremes and ozone cracking. This complete steel package delivers immediate air distribution across service stalls.

• 300 PSI working pressure rating handles high-volume pneumatic impact guns, ratchets, and tire inflators.
• 50-foot 3/8-inch ID EPDM rubber hose remains flexible from -40°F up to 190°F without kinking.
• Solid brass full-flow external swivel prevents air pressure drops during active drum rotation.
• Stamped steel guide arm adjusts to multi-angle positions for overhead ceiling, wall, or bench mounts.
• Containerized steel power spring canister protects mechanics during bench maintenance service.
• Multi-position locking ratchet mechanism holds chosen working hose extension without ratchet slip.
• 4-way non-snag roller guide reduces outer hose rubber wear during sharp diagonal floor pulls.

Pneumatic Flow Dyno Telemetry Data

Shop flow stand testing evaluates line restriction and pressure stability under continuous pneumatic demand. Passing 38 CFM at 120 PSI through the 50-foot EPDM hose produces a low 4.2 PSI pressure drop across the entire core. Air expansion during continuous tool use lowers swivel metal temperatures by 6°F. Acoustic measurements record 68 dBA at 3 feet during spring return. The enclosed spring motor exerts 25 inch-pounds of retraction force, drawing 50 feet of rubber hose across oily shop concrete without line stall.

Field Service Maintenance Boundaries

Busy shop stalls subject reels to heavy side pulling. Do not connect this low-pressure unit to high-pressure wash pumps or hydraulic circuits exceeding 300 PSI, as the brass swivel will crack under shock load. Avoid direct outdoor exposure without weather shielding.

• Inspect brass swivel threads and nitrile seals every 60 operating days.
• Clean metal grinding grit from guide arm rollers every 30 days.
• Check overhead mounting fasteners for vibration loosening every 6 months.

Commercial Warranty Package Contents

Milton provides a 1-Year limited commercial warranty covering steel structural welds, drive spring fatigue, and swivel assembly leaks. The package contains the assembled steel hose reel, factory-installed 50-foot EPDM rubber hose, solid brass swivel, adjustable rubber hose stop, and technical mounting templates.