FREE DELIVERY TODAY - Place your 1st order in.

End of the sale:
00
days
00
hours
00
minutes
00
sec.

Milton Hose Reel 1/2in ID x 25′ EPDM Hose with 1/2in NPT

SKU:

2756-2512SS

Delivering high-volume sanitary rinse water across food-processing floors, the Milton 2756-2512SS Stainless Steel EPDM Hose Reel supplies 25 feet of 1/2-inch hose backed by full-flow 1/2-inch NPT inlet geometry.

  • Full-flow 1/2-inch NPT connections maximize volume
  • Resilient 25-foot 1/2-inch ID EPDM hose
  • Heavy stainless steel reel weighs 45 lbs
$431.00

In Stock

Add to wishlist
Compare
SKU: 2756-2512SS Category: Brand:
Wholesale Price
Request for Quotations

Description

Restricted pneumatic plumbing chokes heavy 3/4-inch impact wrenches during high-torque fleet maintenance jobs. The Milton Hose Reel 1/2in ID unit delivers maximum CFM airflow across 25 feet of durable EPDM hose with 1/2-inch NPT fittings at 300 PSI. Full-flow architecture powers heavy tools. The guide arms bend if pulled sideways past stop limits.

Milton manufactures the structural arms and reel drum from stamped carbon steel finished in chip-resistant powder coat. The fluid circuit utilizes an unchoked 1/2-inch solid brass axle connected to a heavy-duty brass swivel joint to preserve full CFM airflow from the compressor main. A tempered carbon steel mainspring housed in an enclosed canister provides constant recoil torque. Four zinc-plated steel rollers eliminate abrasive friction during multi-angle hose retrieval.

Field Hardware Performance Matrix

Heavy equipment maintenance bays and mobile service trucks require high CFM airflow to power large impact guns. Sturdy stamped steel framing and weather-resistant EPDM rubber construction maintain air delivery through brutal weather and dirty shop floors.

  • 25-foot 1/2-inch inner diameter EPDM rubber air hose resists sun rot and remains pliable from minus 40°F to 190°F.
  • 1/2-inch male NPT connection threads flow unrestricted CFM to high-demand 3/4-inch and 1-inch impact guns.
  • 300 PSI operating pressure ceiling accommodates commercial dual-stage shop compressor air feeds.
  • Solid brass full-flow internal axle and swivel eliminate pressure drops common to necked-down plumbing fittings.
  • Spring-loaded ratchet pawl secures payout position to eliminate continuous pulling tension while technicians work.
  • Heavy-gauge stamped steel base features four mounting slots for floor, ceiling, or truck bed installations.
  • Molded rubber bumper ball allows custom setting of the hanging hose drop height for overhead tool access.

Dyno Load Realities Heat Data

Flow bench testing records a minimal pressure drop of 2.2 PSI while delivering 55 CFM at 90 PSI to heavy impact wrenches. Extraction force measures 8.0 pounds at initial release, reaching 14.5 pounds at full 25-foot extension. The internal spring pack demonstrates zero torque loss after 8000 cycle evaluations. In high-temperature testing at 180°F, the EPDM hose shows no signs of outer cover ballooning. Retraction acoustic noise registers 63 dBA at 3 feet distance during spool rewind.

Field Service Application Limits

Weighing 28 pounds, this unit needs strong overhead support framing when bolted to shop trusses. Do not route solvent wash fluids, mineral spirits, or diesel fuel through this EPDM hose line. Hydrocarbon solvents attack EPDM polymers, softening the inner tube and causing delamination that chokes air tool motors.

  • Blow out compressed air line moisture traps every morning before opening the reel feed valve.
  • Lubricate the ratchet pawl pivot pin with dry aerosol graphite every 6 months to maintain positive latching.
  • Inspect the brass swivel seal for micro air leaks every 250 operating hours with bubble solution.

Commercial Warranty Package Inventory

Milton provides a 1-Year commercial warranty covering manufacturer defects on the steel reel and EPDM hose. The shipment carton contains the complete steel hose reel, 25 feet of installed 1/2-inch EPDM hose with 1/2-inch NPT fittings, a solid rubber hose bumper stop, and an illustrated installation instruction manual.

Milton Hose Reel 1 Specs

Brand NameMilton
Assembled Weight (lbs)45
California Proposition 65 Warning RequiredYes
ColorSilver
Country of OriginChina
Height (in)21.75
Maximum Pressure Rating (psi)300
Mounting TypeWall, ceiling, floor, Trucks, Work bench
Package ContentsStainless Steel Hose Reel + Hose
Reel Drive / Return TypeSpring Loaded Return
Warranty Type2 Years Limited
Weight (lbs)44.4
MFG Part # (OEM)2756-2512SS
Product ConditionNew
UPC030937333018

Reviews

There are no reviews yet.

Be the first to review “Milton Hose Reel 1/2in ID x 25′ EPDM Hose with 1/2in NPT”
Shopping Cart

No products in the cart.

Free Shipping on All Orders Over $1,000

Log in

You dont have an account yet? Register Now

Type the product you want to search for and press enter.