Rubbermaid BRUTE 1 Cu-Yd Plastic Black Heavy-Duty Tilt Truck

Description

Demolition debris and wet concrete slurry tear apart ordinary trash cans on industrial renovation projects. The Rubbermaid FG131600BLA Heavy-Duty Tilt Truck hauls up to 2,100 lbs of heavy jobsite rubble across fractured surfaces using rotational-molded polyethylene construction. It dumps cleanly through a balanced steering wheel design, though its 33.5in width limits standard doorway access.

The structural hopper uses seamless rotational-molded high-density polyethylene reinforced with an integrated steel frame chassis. The truck carries 1 cubic yard volume with a maximum weight capacity of 2,100 lbs. Exterior floor stance measures 72.25in long by 33.5in wide by 43.75in tall with total tare mass of 111 lbs. Two 12in blow-molded polyolefin wheels on a solid steel axle pair with two 5in swivel casters for maneuvering.

Key Features of Rubbermaid FG131600BLA

Plant managers and demolition foremen reviewing material handling pricing purchase this heavy-duty truck for scrap removal. Facility mechanics buy Rubbermaid FG131600BLA units to clear machining chips and bulk construction waste without bin cracking.

• A seamless rotational-molded polyethylene body resists dents, rust, and chemical corrosion from wet waste.
• The reinforced tubular steel undercarriage frame supports extreme loads up to 2,100 lbs without sagging.
• A constant-force dump design lets one worker tilt and empty full loads without back injury.
• The 1 cubic yard volume accommodates bulky scrap lumber, concrete chunks, and metal turnings.
• Two 12in non-marking solid wheels roll over rough terrain, extension cords, and outdoor gravel.
• Two 5in swivel casters provide precise steering control down narrow industrial plant aisles.
• The smooth interior surface wipes clean with a pressure washer to eliminate chemical odor buildup.

Dynamic Structural Load Roll Testing

Dynamic load testing loads the hopper with 2,100 lbs of crushed concrete aggregate across 5 miles of broken asphalt. The structural poly tub shows zero wall bulging or stress cracking along lower corner radiuses. Handwheel push force registers at 34 lbs to initiate forward rolling on smooth factory concrete. The solid steel axle tolerates 3,000 lbs static downward force without permanent deflection over 0.015in. Tipping effort requires 42 lbs downward force on the rear handle.

Industrial Facility Usability Service Matrix

The ergonomic rear push handle positions wrists comfortably, allowing a single worker to roll heavy loads across warehouse floors. Do not buy this 33.5in wide truck for facilities with narrow 30in interior passage doors.

• Grease the rear caster swivel bearings with NLGI 2 lithium grease every 60 days.
• Inspect the solid steel axle lock collars and wheel retention pins every 90 days.
• Wash the interior hopper with a hot water pressure washer every 30 days to clear grime.

Commercial Warranty Factory Inclusions Summary

Rubbermaid Commercial Products covers this tilt truck with a 1-Year limited warranty against structural defects. The factory shipment arrives fully assembled with the heavy-duty polyethylene tub, the tubular steel frame, two 12in wheels, two 5in casters, and the standard product specification document.