Metabo HPT 36V MultiVolt Portable Rebar Bender/Cutter with Duplex Nailer and Triple Hammer BOLT Impact Driver Kit Bundle

Description

Brushless motor drive circuits transform 36V cordless battery power into portable rebar cutting, bending, and concrete form nailing force. The Metabo HPT KITVBNRWH36 MultiVolt Bundle combines a portable rebar bender/cutter, a duplex nailer, and an impact driver. This equips concrete crews for complete formwork, though the three-tool system requires multiple storage cases.

The rebar bender/cutter uses high-tensile steel frames housing a 36V brushless motor and grease-packed planetary reduction gears. The duplex nailer and Triple Hammer impact driver feature glass-filled nylon housings with sealed motor assemblies. Total combined kit weight reaches 58 lbs, with the primary rebar machine occupying 20.1in long by 9.1in wide by 9.5in tall. Precision proximity switches and hardened steel cutter blocks handle #5 Grade 60 rebar.

Key Features of Metabo HPT KITVBNRWH36

Concrete formwork contractors reviewing bundle pricing choose this 36V cordless package for ground-up commercial pours. Forming carpenters buy Metabo HPT KITVBNRWH36 bundles to build wooden forms, cut reinforcement, and drive fasteners with one unified battery platform.

• The 36V MultiVolt rebar machine cuts #5 5/8in rebar in 2.6 seconds and bends 180 degrees in 3.8 seconds.
• The cordless duplex nailer sinks 16D duplex nails into wood concrete forms without air hoses.
• The Triple Hammer impact driver produces 1,859 in-lbs torque to sink form screws and concrete anchors.
• MultiVolt battery technology allows cordless operation or continuous AC power with an optional adapter.
• A mechanical dial on the rebar bender presets bend angles from 0 to 180 degrees for repeat stirrups.
• The rebar machine cuts up to two #3 bars or one #5 bar in a single cycle.
• Brushless motor design across all three tools maximizes run time and eliminates carbon brush maintenance.

Multi-Tool Battery Dynamic Performance Test

Bench tests clock the 36V rebar machine completing 170 cuts and 310 bends on #5 Grade 60 rebar per battery charge. The duplex nailer fires 900 nails per charge into southern yellow pine form lumber. The impact driver delivers 1,859 in-lbs torque at 4,000 IPM under full load. Bender motor temperature stabilizes at 126°F after 40 consecutive bends. The reversible rebar cutting dies complete 1,000 cuts without edge dulling or chipping.

Concrete Formwork Usability Service Protocol

The 41 lbs rebar machine features dual handles for balanced transport across muddy slab sites, while the compact nailer maneuvers inside wall forms. Do not buy this bundle for heavy steel fabrication above #5 5/8in or heavy commercial crane erection.

• Pack the rebar bender gear train with NLGI 2 lithium grease every 100 hours of operation.
• Clean concrete dust and wood chips from the nailer nose and impact chuck every 20 hours.
• Check the rebar cutter blade bolts every 30 days and tighten to 25 ft-lbs torque.

Factory Warranty Bundle Crate Contents

Metabo HPT warrants the bundle tools with a 5-Year professional tool warranty and a 2-Year battery warranty. The comprehensive bundle includes the VB3616DA rebar bender/cutter, the duplex nailer, the Triple Hammer impact driver, two 36V/18V MultiVolt 4.0Ah/8.0Ah batteries, a rapid charger, and three tool cases.