Milwaukee M18 FORCE LOGIC Press Tool with ONE-KEY & 1/2 Inch – 2 Inch IPS-P Pivoting Press Ring Kit Bundle

Description

Experience fast pipe joining without open flames when you clamp the Milwaukee M18 IPS Press Ring Bundle onto gas line fittings. The tool combines a ONE-KEY press tool with 1/2in to 2in IPS-P pivoting press rings. Pivoting rings require an actuator jaw, demanding visual ring alignment into the fitting groove before pulling the trigger.

All-metal front gearcase construction protects the high-pressure hydraulic piston from mechanical impacts in boiler rooms. Powered by Milwaukee M18 REDLITHIUM batteries, the hydraulic pump generates 7,200 lbs of linear press thrust. This commercial pipe press tool measures 16.8in by 11.9in by 4.8in and carries an operational weight of 8.6 lbs without rings.

Key Features of Milwaukee 2922-20-IPS

Mechanical piping contractors buy Milwaukee 2922-20-IPS bundles to install black iron gas pipe and hydronic lines without threaders. Commercial equipment pricing reflects the inclusion of 0.5in to 2in IPS pivoting press rings, heavy ring actuator jaws, and digital ONE-KEY inventory tracking.

• A hydraulic pump generates 7,200 lbs of press force to seal carbon steel connections up to 2in diameter.
• The bundle contains 0.5in, 0.75in, 1in, 1.25in, 1.5in, and 2in IPS-P pivoting press rings for MegaPress fittings.
• Pivoting press rings wrap around black iron pipes inside narrow wall cavities and tight ceiling spaces.
• ONE-KEY digital integration provides tool tracking, remote security lockouts, and press cycle audit reports.
• An in-line chassis design balances tool mass for single-hand operation during overhead installations.
• Redundant cycle monitoring verifies full hydraulic pressure before the internal ram retracts.
• LED indicator lights verify joint completion and display battery charge status.
• A brushless motor provides long tool life and fast cycle times across demanding mechanical projects.

Hydraulic Piston Output Pressure Tests

Testing on calibrated load cells verifies 7,200 lbs of linear hydraulic force. Pressing a 2in MegaPress carbon steel fitting requires 10 seconds, creating a seal rated for 200 PSI fuel gas and 250 PSI hydronic pressure. The joint withstands 600 PSI hydrostatic test pressure. Sound levels hold at 75 dB, with the tool drawing 18A peak.

Operator Interface Routine Upkeep Boundaries

The inline handle balances tool mass in the hand, while the cycle trigger activates with 3 lbs finger pressure. Jaw quick-release pins operate with 4 lbs force. Never actuate this tool without an approved press jaw or ring actuator locked into the yoke.

• Clear metal burrs and oil residue from IPS press ring cavities every 8 hours.
• Apply light machine oil to the actuator jaw contact points every 50 pressing cycles.
• Wipe the tool chassis clean and check battery receiver contacts every 30 days.

Warranty Statement Machinery Delivery Inventory

Milwaukee covers this FORCE LOGIC press tool with a 5-Year commercial warranty and a 3-Year battery pack warranty. The bundle includes the 2922-20 press tool, six IPS-P press rings, ring actuator, two M18 batteries, multi-voltage charger, and carrying cases.