Milwaukee M18 Brushless Telescoping Pole Pruning Shears Kit

Description

Snip high tree suckers, water sprouts, and orchard branches without hauling heavy pole saws or manual bypass pruners. The Milwaukee M18 Brushless Telescoping Pole pruning shears kit cuts woody branches using automated hydraulic-style motor power. This cordless shears kit grooms fruit orchards, vineyards, and landscape trees. It cannot cut dead timber thicker than 1-3/4 inches.

A telescoping aluminum shaft extends the reach while keeping overall weight balanced in the operator hands. A high-efficiency brushless motor drives forged high-strength carbon steel bypass blades through branch wood with smooth mechanical strokes. The inline battery receiver acts as a natural counterbalance at the base of the pole. An electronic mode switch toggles between 1-3/4-inch full-capacity cuts and 1-inch rapid-speed cuts to speed up light thinning routes.

Telescopic Pruning Shears Hardware Details

Orchard managers and commercial grounds crews depend on powered telescoping shears to maintain canopy health without shoulder strain. This battery tool snips through green branches fast.

• Brushless motor generates high mechanical bypass cutting force through 1-3/4-inch branches
• Telescoping shaft expands overall tool length from seven to ten feet for overhead reach
• High-strength forged steel bypass blades make clean botanical cuts without crushing wood bark
• Cut capacity mode selector toggles between 1-inch fast cycle and 1-3/4-inch full open modes
• M18 RedLithium HIGH OUTPUT battery powers up to two thousand cuts in 1-inch wood per charge
• Integrated branch hook pulls cut twigs out of dense canopies after shearing strokes
• Rubberized grip zones provide non-slip tool handling during vertical overhead trimming

Dyno Shear Cutting Bench Telemetry

Laboratory cycle testing records a 1.2-second full cut-and-retract cycle in 1-1/2-inch green oak branches. The M18 6.0 Ah battery pack completes 2100 cuts on a single charge. Sound pressure meters record 68 dBA at three feet during blade cycling, running virtually silent compared to gas pole saws. Shear blade temperature rises less than 12 degrees Fahrenheit above ambient air after one hundred continuous cuts.

Orchard Pruning Handling Usability Bounds

Loosen the shaft collar to adjust extension, lock the clamp, hook the fixed blade over the branch, and pull the trigger to complete the cut. Keep fingers away from the open cutting jaw. Do not use these shears to cut metal fencing, dry lumber stakes, or utility wires.

• Forged bypass blades require resin-solvent cleaning and light oiling after every work shift
• Blade pivot lock nuts demand torque checks to 15 foot-pounds every fifty hours
• Battery receiver terminals require dry compressed air cleanouts every forty operating hours

Commercial Tool Warranty Kit Manifest

Milwaukee covers this 3008-21 pruning shears kit with a 3-Year commercial limited warranty. The heavy carton contains the telescoping pruning shears unit, M18 HIGH OUTPUT 6.0 Ah battery, multi-voltage charger, blade scabbard, and technical operator manual.