Powermatic 201HH 7.5HP 3Ph 230V 22In Helical Head Planer

Description

Need massive hardwood surfacing throughput on continuous plant production shifts? The Powermatic 201HH 22in Helical Planer surfaces dense timbers with a 7.5HP industrial motor. The machine integrates a Byrd helical head with a 22in wide table. The cast iron infeed table rollers require precise height calibration to feed rough lumber without slipping.

Solid cast iron forms the monolithic base, table, and cutterhead housing to deaden cutting harmonics during aggressive passes. The 7.5HP motor runs on 230V three-phase power, drawing 22 FLA while driving the Byrd helical head at 4,500 RPM. This industrial wood planer occupies an operational floor stance of 46in by 40in and weighs 1,350 lbs.

Key Features of Powermatic PM9-1791268

Production millwork plants buy Powermatic PM9-1791268 machinery to plane rough hardwoods continuously without grain tear-out. High-end machine pricing reflects the authentic Byrd helical cutterhead equipped with four-sided solid carbide inserts and heavy-duty three-phase motor architecture.

• A Byrd helical cutterhead holds indexable carbide inserts on spiral shear angles to eliminate grain tear-out.
• The 7.5HP three-phase motor delivers constant cutting torque through deep 0.187in hogging passes in hardwoods.
• A massive 22in by 32in ground cast iron table supports heavy hardwood slabs and structural beams up to 800 lbs.
• The two-speed gearbox shifts feed rates between 20 FPM and 30 FPM to match varied stock grain densities.
• Sectional steel infeed rollers and sectional chipbreakers permit feeding multiple boards of uneven thickness together.
• Integrated digital readouts display exact table height down to 0.001in for repeatable thickness settings.
• A 5in diameter dust collection port connects directly to commercial central dust collection systems.

Helical Cutterhead Dynamic Surfacing Tests

Radial runout across the 22in helical cutterhead shaft measures less than 0.0002in TIR under dial indicators. Surfacing a 20in wide figured hard maple slab at 0.125in depth of cut causes zero motor RPM droop. Electrical load draws 18A continuous current at 230V. Operating sound registers 76 dB, while bearing caps stabilize at 114°F after four hours.

Operator Interface Routine Upkeep Boundaries

The cast iron table elevation handwheel requires 5 lbs rim force to lift the heavy machine bed. The feed rate shift lever engages gears with 4 lbs hand effort. Do not install this 1,350 lbs industrial planer on wood subfloors or electrical circuits under 40A.

• Rotate chipped carbide insert knives 90 degrees and torque retention screws to 50 in-lbs as needed.
• Inspect the gearbox oil level sight glass every 40 hours and top off with ISO 220 gear oil.
• Pump clean ISO 68 machine oil onto the four vertical table support posts every 8 hours of shop use.

Warranty Statement Machinery Delivery Inventory

Powermatic covers this flagship planer with a 5-Year commercial warranty against defects in craftsmanship and materials. The heavy shipping crate contains the 201HH planer, Byrd helical head with carbide inserts installed, digital readout, dust hood, leveling pads, and technical manuals.