Baileigh BP-7098CNC Hydraulic Press Brake 98 Inch 70 Ton

Description

Precision job shops battle angular variation on sheet parts, making the Baileigh BP-7098CNC Press Brake an essential forming asset. The 70-ton hydraulic ram bends 98in sheet components within tight tolerances. Two-axis CNC automation eliminates manual trial-and-error setups, but the 11,440 lbs machinery weight demands a level 6in industrial concrete floor pad for proper anchor stability.

Heavy electro-welded steel plate side housings absorb severe tonnage stresses during continuous shop shifts. An industrial 10HP motor draws 28 FLA on 220V three-phase power to drive the high-pressure hydraulic pump. Floor stance measurements span 118in length by 58in width by 91in height, with total dry equipment weight sitting at 11,440 lbs.

Key Features of Baileigh BP-7098CNC

Structural production facilities buy this CNC press brake to slash sheet bending pricing. Two-axis numerical control sets ram stroke depth and backgauge stops across high-volume production orders.

• Two-axis CNC controller programs ram depth and dual-axis backgauge stop positions in seconds.
• Full 70-ton hydraulic capacity bends 1/8in plate across the complete 98in bed width.
• Mechanical crowning system adjusts bed camber to maintain consistent angles across long flanges.
• Precision optical linear scales feed ram position data with 0.0004in positioning accuracy.
• Quick-clamp upper punch holders speed up tooling section changes across complex bends.
• Rexroth hydraulic directional valves deliver proportional fluid control to twin cylinder pistons.
• Dual front support arms adjust laterally along linear guide rails to hold wide panels.
• Schneider electrical components ensure uninterrupted control reliability in hot summer shops.

Hydraulic Precision Deflection Test Metrics

Bench diagnostics show ram positioning repeatability holds within 0.0004in across forty consecutive test cycles in 12-gauge cold-rolled steel. Hydraulic system pressure holds steady at 2,900 PSI under full tonnage stall tests. Hydraulic fluid temperature plateaus at 127°F after five continuous operational hours. Linear encoder readouts maintain zero drift without loss of position under heavy stamping vibration.

Console Control Hydraulic Maintenance Steps

The shrouded dual-pedal foot station activates ram movement with 5 lbs foot pressure. The color CNC touchscreen responds without hesitation through oily work gloves. Do not install this heavy machine without anchor bolts secured into reinforced concrete.

• Replace the 35-gallon ISO 46 hydraulic oil reservoir charge every 2,000 operational hours.
• Lubricate the backgauge linear rails with NLGI 2 lithium grease every 40 hours.
• Torque hydraulic manifold block mounting bolts to 50 ft-lbs every 6 months.

Baileigh Hydraulic Press Brake Warranty

Baileigh protects the BP-7098CNC press brake with a 1-Year parts warranty and lifetime technical support. The crated machine shipment includes the 70-ton press brake, segmented punch set, multi-V bottom die, CNC pendant console, and operation manuals.