QuickJack 8000TLX 8000 Lbs 110V Extended Frame Portable Truck Lift Package

Description

Working on long-wheelbase work trucks in commercial bays requires the QuickJack 8000TLX Portable Truck Lift. This extended-frame electric-hydraulic lifter raises 8,000 lbs up to 24in of working height. Heavy steel frames reach distant vehicle jack points on three-quarter-ton pickups. Mechanics must position frames on flat concrete because floor slopes create mechanical lock binding.

Welded 14-gauge structural box steel sections form twin lifting frames equipped with dual-position mechanical safety lock bars. A mobile 110V hydraulic power unit houses a 0.5HP motor pulling 11A on standard 15A wall receptacles. Bare frame dimensions span 76in long by 15in wide, supporting a total system weight of 260 lbs split across two mobile frames.

Key Features of QuickJack 5176113

Mobile truck repair technicians buy QuickJack 5176113 packages to service heavy fleet pickups and commercial service vans on location. Industrial pricing delivers fast shop payback by eliminating the need for dedicated floor-mounted two-post lifts.

• Massive 8,000 lbs lifting capacity raises heavy diesel pickups, work vans, and loaded commercial trucks.
• Extended 76in frame length reaches distant vehicle pinch welds and frame points spaced up to 66in apart.
• Collapsed profile of 4in slides under standard passenger cars and light commercial work vehicles.
• Twin dual-position mechanical safety lock bars secure raised loads at 20in and 24in elevations.
• Compact 110V power unit operates from standard shop outlets without dedicated electrical subpanels.
• Quick-connect hydraulic hose couplers seal shut without fluid drips during storage and transport.
• Urethane transit wheels allow easy roll-away storage against shop walls between vehicle repair jobs.

Hydraulic Thrust Structural Frame Deflection

Lifting an 8,000 lbs commercial test vehicle to the 24in high lock notch takes 42 seconds at 2,700 PSI fluid pressure. Motor current draws 12.8A during initial lift before dropping back down to 9.8A mid-stroke. Frame rail deflection measures under 0.085in across the 76in box beam. Sound output stays below 68 dB during full pump operation.

Frame Transport Rules Hydraulic Coupling Care

Moving each 130 lbs frame uses end-mounted urethane wheels requiring 18 lbs of pull force on smooth concrete floors. The dual safety lock bars disengage via single-hand cam levers on each rail. Do not buy this extended frame lift for compact sports cars with jack points under 43in.

• Inspect all four hydraulic quick-disconnect O-rings for cuts or deformation every 25 lift cycles.
• Wipe frame slide channels clean and coat with dry silicone spray every 30 days of shop use.
• Bleed air from cylinder bleed screws after any hydraulic disconnect or every 6 months of ownership.

QuickJack Factory Warranty Freight Crate Contents

QuickJack covers this 8,000 lbs lift package with a 1-Year structural and hydraulic pump warranty. The crated delivery totals 310 lbs split across three packages. The shipment contains two 8000TLX frames, the 110V hydraulic pump unit, quick-connect hoses, four medium rubber lift blocks, and four tall blocks.