Power Team 30 Ton 0.5in Cylinder Stroke RLS Series Single Acting

Description

Position high-tonnage hydraulic force inside tight machinery gaps where standard cylinders cannot fit. The Power Team 30 Ton 0.5in cylinder stroke RLS series single-acting hydraulic ram delivers 60000 lbs of lifting force within an ultra-low 2.31-inch collapsed profile. It cracks seized machinery joints fast, though stroke length limits vertical travel to a half-inch per reset.

Power Team machines the cylinder body from solid high-strength forged alloy steel, finished with a corrosion-resistant baked enamel exterior coating. The hard chrome-plated steel piston ram features heavy grooved saddle teeth to bite into lifted metal without slipping. A heavy-duty internal spring returns the single-acting piston automatically upon hydraulic valve release. Operating hydraulic pressure reaches 10000 PSI, establishing 9.8 lbs total cylinder weight.

Features of Power Team RLS300

Heavy industrial rigging, bridge bearing maintenance, and machinery leveling demand ultra-low collapsed cylinder heights and extreme hydraulic tonnage. Millwrights and structural ironworkers position this low-profile pancake cylinder beneath turbine casings, bridge beams, and heavy presses.

• 30-ton rated lifting capacity delivers 60000 lbs of hydraulic force at 10000 PSI operating pressure.
• Ultra-low 2.31-inch collapsed height slips into tight machinery gaps and low-clearance structural seams.
• 0.5-inch hydraulic ram stroke cracks open seized equipment flanges and levels machine baseplates.
• Hard chrome-plated steel piston resists scoring, abrasion, and hydraulic fluid blow-by under load.
• Heavy-duty internal return spring retracts the piston ram rapidly when release valves open.
• Grooved piston rod end acts as an integral saddle to prevent load slip during off-center lifting.
• Standard 3/8-inch NPTF quick-connect hydraulic coupler attaches to manual and electric pumps.

Hydraulic Bench Dyno Load Telemetry

Proof testing verified cylinder seal integrity under 125 percent proof load at 37.5 tons on a calibrated hydraulic press test stand. Hydraulic pump operating pressure peaked at 10000 PSI under full rated 30-ton load elevation. Cylinder body steel temperatures rose a minor 12°F above ambient room temperature after twenty consecutive full-stroke cycles. Single-acting internal spring return clocked full retraction in 1.8 seconds. Forged alloy steel cylinder body wall deflection measured zero under maximum rated pressure testing conditions.

Jobsite Rigging Realities Maintenance Directives

The compact body profile and standard quick-disconnect coupler offer effortless positioning in tight machinery crevices. This single-acting low-profile hydraulic ram is not built for pulling loads, prolonged load holding without mechanical cribbing blocks, or operating beyond 10000 PSI.

• Hydraulic quick-connect couplers demand clean rag wipe-downs before pump connection to prevent valve fouling.
• High-pressure pump hydraulic fluid levels require seasonal checks using clean ISO 46 hydraulic oil.
• Cylinder ram chrome plating requires visual inspection for deep scoring and metal galling every 30 days.

Certified Industrial Warranty Carton Manifest

Power Team covers this hydraulic cylinder with an industrial lifetime warranty package against manufacturing defects in steel materials and workmanship. The factory carton manifest contains the assembled RLS300 hydraulic ram, high-flow 3/8-inch female coupler, dust cap, warranty registration card, and official manufacturer safety documentation.