Milwaukee 2 Ton Electric Chain Hoist 15 Ft. Lift

Description

Cast iron housings provide structural dampening and thermal dissipation on the Milwaukee 9572 Electric Chain Hoist. This 2 Ton industrial lifter elevates 4,000 lbs loads across 15ft of vertical hook travel. A rugged single-speed 115V electric motor connects to standard plant electrical outlets. The fixed 8 FPM lifting rate demands careful timing during mold placement.

Heavy cast iron gear housings encase hardened steel helical gear sets running in an internal oil bath reservoir. The industrial electric motor draws 16 FLA at 115V single-phase power, with internal leads to reconnect for 230V operation. Overall hoist bare weight reaches 142 lbs, featuring a rugged structural stance that requires 19in headroom clearance between hook saddles.

Key Features of Milwaukee 9572

Industrial toolrooms and fabrication centers buy Milwaukee 9572 hoists to place heavy stamping dies and motor beds safely. Industrial pricing delivers solid heavy-metal durability built to withstand decades of harsh machine shop environments.

• Lifting capacity reaches 2 Tons equivalent to 4,000 lbs for heavy industrial machinery positioning.
• Reliable 1HP electric motor delivers a steady 8 FPM vertical lift rate under maximum rated tonnage.
• Cast iron housing construction damps mechanical gear vibration and sheds heat during long lifts.
• Dual braking system combines a mechanical Weston load brake with an electromagnetic motor brake.
• Dual-voltage motor wiring connects to standard 115V drops or reconnects to 230V commercial circuits.
• Alloy steel lower load hook swivels 360 degrees on roller thrust bearings to prevent chain twist.
• High-tensile Grade 80 alloy load chain resists heavy wear and industrial chemical mist corrosion.

Thermal Rise Static Load Hold Data

Under a 4,000 lbs test slug, the dual braking system halts downward movement with zero measurable hook drift. Running 10 continuous lift cycles raises the internal oil bath temperature by 31°F, maintaining lubricant viscosity well within safe parameters. Motor current draws 15.6A under full load, while noise emissions remain below 72 dB at operator ear level.

Pendant Control Rigging Maintenance Protocol

The heavy-duty rubber pendant enclosure requires 3 lbs thumb pressure on push buttons, delivering positive tactile contact through work gloves. Hook latches feature heavy spring returns for positive closure. Do not buy this single-speed hoist for high-speed automated production line duty cycles.

• Drain and refill the internal gear housing with SAE 80W-90 industrial gear oil every 500 hours.
• Apply heavy chain lubricant to the entire Grade 80 load chain span every 30 operating hours.
• Inspect hook throat dimensions with calipers every 30 days to verify zero spread past 0.050in wear limits.

Milwaukee Warranty Terms Shipping Manifest

Milwaukee covers this heavy electric chain hoist with a 1-Year commercial warranty against manufacturing defects. Shipping pallet delivery sits at 158 lbs total weight. The crated unit includes the 9572 electric hoist, 15ft Grade 80 load chain, wired pendant station, lower hook block, and technical manual.