JET BLVS018-010 Electric Hoist 120V

Description

Pull structural ironwork and factory machinery into place using the JET BLVS018-010 Electric Hoist. This single-phase variable-speed power unit handles 1,800 lbs with precision lifting control down to 1 FPM. A 120V electric motor plugs into common commercial wall drops without phase converters. Heavy shop duty cycles require cooling intervals during continuous vertical hoisting runs.

Cast aluminum motor housing fins dissipate heat from the totally enclosed 1.1HP electric motor drawing 11 FLA at 120V. High-tensile alloy load chain runs through a machined pocket sprocket, lifting loads across 10ft of vertical hook travel. The complete hoist body weighs 68 lbs, maintaining a compact headroom stance measuring just 14in from hook to hook.

Key Features of JET BLVS018-010

Plant maintenance managers buy JET BLVS018-010 hoists to replace clumsy manual chain falls in toolrooms and die bays. Online commercial pricing makes adding variable speed electric lifting sensible across commercial workstations.

• Working load limit of 1,800 lbs lifts heavy machine tool chucks, raw billets, and production weldments.
• Variable lifting speed ranges from 1 FPM to 24 FPM via pressure-sensitive push button pendant controls.
• Standard 120V single-phase electrical design runs on standard 15A or 20A commercial plant circuits.
• Electromagnetic mechanical disc brake holds suspended loads if input line power cuts out during a lift.
• Hardened steel upper and lower limit switches stop hook travel before bottoming on chain guides.
• Forged alloy steel hooks swivel 360 degrees on thrust bearings to stop chain bunching and twisting.
• Fabric chain container bag catches slack chain links to prevent interference around active workpieces.

Motor Thermal Limits And Brake Hold Tolerances

Continuous full-load bench runs at 1,800 lbs show a motor stator temperature increase of 48°F after 15 minutes of run time. The mechanical disc brake arrests maximum rated loads with zero hook drift across a 24-hour hang test. Under line voltage dips down to 108V, the hoist maintains full 1,800 lbs capacity without thermal trip relay activation.

Pendant Sensitivity And Workshop Maintenance Schedule

The variable pendant button requires 2 lbs of finger pressure, modulating lift rates smoothly across the full stroke. Operators can feather workpieces onto mill tables without jarring machine ways. Do not buy this 120V single-phase hoist for continuous twenty-four-hour production line cycle work.

• Coat the steel load chain links with SAE 30 non-detergent engine oil every 20 hours of service.
• Inspect the lower swivel hook latch and check throat opening with calipers every 30 days.
• Blow metal dust out of motor cooling fins using 40 PSI compressed air every 90 operating days.

Warranty Cover And Unboxed Equipment Manifest

JET supports this electric chain hoist with a 2-Year industrial warranty against defects. The package ships in a wood-reinforced carton weighing 75 lbs. Unboxing reveals the 1,800 lbs hoist body, 10ft Grade 80 load chain, ergonomic variable-speed pendant controller, nylon canvas chain container, lower hook block, and operating manual.