American Forge Durable 30 Ton Air/Hydraulic Bottle Jack

Description

Rigging crews face blown cylinder seals under heavy machinery, so the American Forge 5630SD Bottle Jack provides dependable 60,000 lbs lifting thrust. This heavy pneumatic ram lifts commercial equipment from an 11in collapsed stance up to 18in total reach. A welded steel cylinder stops fluid bypass under side load, though shop mechanics still require compressed air lines for automated pumping.

Solid ductile iron base castings resist floor point fractures under maximum hydraulic pressures. The air motor connects to an internal high-pressure piston pump, operating on standard shop pneumatic feeds between 90 PSI and 140 PSI. A secondary manual pump rocker arm accepts a steel pump handle. Base dimensions span 9in long by 7in wide, keeping bare tool weight at 46 lbs.

Key Features of American Forge 5630SD

Heavy machinery movers buy American Forge 5630SD jacks to handle transformer placement and production press realignment. Budget-friendly commercial pricing allows outfitting entire road maintenance trucks without excess capital outlay.

• Thirty-ton lifting threshold equivalent to 60,000 lbs lifts heavy tracked dozers and stamping equipment.
• Collapsed profile height of 11in slides under low rigging points and heavy structural machinery frames.
• Hydraulic ram stroke provides 4-3/4in of powered lift paired with an adjustable screw extension.
• Heat-treated alloy steel extension screw adds 2-1/4in of mechanical height adjustment before pumping.
• Air-hydraulic motor reduces technician fatigue by cycling up to 180 strokes per minute on air.
• Welded steel tank construction prevents hydraulic fluid leakage when tipped flat inside service bodies.
• Hardened chrome-plated piston ram resists corrosion, weld spatter, and grit abrasion in dirty shops.

Air Pressure Hydraulic Piston Force

Supplying 120 PSI air pressure drives the cylinder to full 4-3/4in hydraulic extension in 16 seconds flat. Under a 60,000 lbs proof load, hydraulic pressure peaks at 8,200 PSI while bypass valves maintain stable hold without cylinder creep. Noise output from the air motor exhaust measures 76 dB during rapid ram ascension. Manual pump handle effort registers at 45 lbs to generate full rated working tonnage.

Rigging Clearances Routine Jack Maintenance

The compact welded steel carry handle balances the 46 lbs tool mass for single-hand jobsite positioning. The knurled release valve knob turns with thumb pressure to regulate descent speeds. Do not buy this compact bottle jack for high-stroke vehicle suspension lifts requiring long frame engagement.

• Add 3 drops of light air motor oil into the pneumatic supply inlet every 15 operating hours.
• Wipe the chrome cylinder rod clean of dirt and metal chips after every rigging shift.
• Check hydraulic fluid levels and top off with ISO 32 anti-wear oil every 6 months.

Factory Warranty Crated Tool Inclusions

American Forge covers this pneumatic bottle jack with a 1-Year industrial warranty against factory material defects. Shipping carton weight sits at 49 lbs for ground parcel delivery. The retail box includes the 5630SD bottle jack unit, two-piece steel pump handle, air swivel coupler, and technical service manual.