Werner 20 In. W x 24 Ft. L Stage

Description

Need a wide, continuous elevated work platform between two ladder jacks or pump jacks? The Werner 20 In. x 24 Ft. Stage provides twenty-four feet of rigid walking deck for commercial siding crews. Two workers move along walls without constant scaffold repositioning. The long twenty-four-foot span requires two workers to lift and stage between supports.

The platform structure uses extruded 6061-T6 structural aluminum side rails with slip-resistant aluminum decking rungs and vinyl-wrapped bottom edges. Solid aluminum cross members connect to the outer rails with high-strength cold rivets. The walking surface features slip-resistant dimpled traction decking. The stage carries an ANSI and OSHA 500-pound two-person load rating. Unboxed unit weight totals 68 lbs, spanning 288 inches long by 20 inches wide with a 6-inch side rail depth.

Key Features of Werner 2524

Commercial siding contractors and window installers buy this 24-foot aluminum stage for long wall elevations. Review wholesale pricing on this commercial staging plank to increase exterior jobsite productivity and crew safety.

• Twenty-four-foot extruded aluminum stage spans long distances between scaffold towers.
• Twenty-inch wide deck provides comfortable foot space for two siding mechanics.
• Dimpled slip-resistant aluminum deck panels provide grip in wet weather conditions.
• Six-inch deep side rails prevent excessive platform sag under full crew loads.
• Vinyl-wrapped side rail edges protect worker hands from sharp aluminum burrs.
• Solid-riveted cross members withstand continuous vibration and repetitive foot traffic.
• Five hundred pound rating supports two workers along with siding material cartons.

Deck Span Deflection Proof Tests

Proof testing on twenty-four-foot center-to-center supports applies a five hundred pound distributed test load across the middle third of the platform. Vertical center deflection measures 2.1 inches, remaining well within OSHA maximum deflection limits. Cross-deck rivets withstand eight hundred pounds of shear force without loosening. Under dynamic footfall tests, the deck exhibits zero permanent camber loss after load removal. Extruded aluminum side rails show zero localized buckling or flange spreading under full test load.

Pump Jack Staging Crew Guidelines

The long twenty-four-foot length commands a synchronized two-man lift when placing the plank onto pump jack arms. Overhang beyond support points must stay between six and twelve inches per OSHA regulations. Do not use this aluminum stage near exposed electrical power lines due to electrocution hazards.

• Inspect side rails for dents or flange gouges before placing the plank onto supports.
• Sweep plaster and wet drywall compound from traction dimples to maintain slip resistance.
• Store stages flat or on edge on designated truck racks to prevent sagging in transit.

Werner Lifetime Staging Warranty Scope

Werner protects this commercial staging platform with a Full Lifetime warranty covering structural rail cracks, deck weld defects, and rivet failures. The freight shipment delivers the 24-foot aluminum stage complete with factory vinyl rail protectors and OSHA safety certification labels.