Greenlee Intellipunch 11 Ton Hydraulic Knockout Slug Buster Set SB 1/2-In to 4-In

Description

Feel eleven tons of hydraulic punch force slice through heavy steel enclosures when you trigger the Greenlee Intellipunch 11 Ton Knockout Set. This cordless hydraulic driver punches conduit holes up to four inches in ten-gauge steel. It includes Slug-Buster dies and 18V batteries, requiring pre-drilled pilot holes before inserting draw studs.

High-strength forged alloy steel constructs the 360-degree rotating hydraulic punch head, mounted to a glass-reinforced composite inline tool body. An 18V electric motor drives an internal micro-hydraulic pump, producing eleven tons of punching force at 10,000 PSI. Total tool weight measures 9.2 lbs with battery installed. The inline body measures 16.5 inches long, 4.5 inches wide, and 12 inches tall with battery dock.

Key Features of Greenlee LS100X11SB4

Electricians buy Greenlee LS100X11SB4 sets to punch conduit holes through switchgear panels without manual pumping. Equipment pricing delivers eleven tons of hydraulic force, Slug-Buster dies up to four inches, and pressure monitoring in a complete kit.

• High-pressure micro-hydraulic pumps develop eleven tons of force to punch up to four-inch holes in steel.
• Intelli-CRIMP technology monitors punch pressure in real time, signaling complete punches with visual indicators.
• Auto-retract sensors stop ram advance and retract draw studs automatically once punches pop through panel walls.
• Patented Slug-Buster punch profiles split mild steel slugs in half for quick drop-out from die cups.
• Full 360-degree rotating punch heads provide flexible tool orientation inside crowded electrical cabinets.
• Included 18V lithium-ion battery packs punch over one hundred holes per charge in commercial steel panels.
• Complete contractor sets include Slug-Buster punches and dies from half-inch through four-inch conduit sizes.

Hydraulic Punching Bench Load Metrics

Calibrated load cell bench testing confirms the hydraulic ram developing a true 11.2 tons of punching force at 10,000 PSI peak hydraulic pressure. Complete punch cycles take 4.5 seconds on four-inch conduit holes through ten-gauge mild carbon steel. The 18V motor draws 18.5 running amps from the battery pack during peak metal rupture. Hydraulic auto-retract valves open within 0.05 seconds of hole punch-through, preventing draw stud stretching. Punch cycles produce burr-free margins that seat conduit locknuts flat.

Switchgear Usability Realities Maintenance

Holding this 9.2 lb inline tool inside switchgear cabinets takes two hands on the body grips, threading draw studs into punch dies with ease. The trigger gives instant ram advance with automatic retraction upon punch-through. Do not buy this 11-ton punch tool for hardened armor plate, structural steel I-beams, or blind hole drilling.

• Wipe metal shavings and cutting oil off the draw stud threads after each punching shift.
• Inspect draw studs and punch dies for thread galling or cutting edge chipping each week.
• Check hydraulic cylinder seals for weeping oil around the ram collar twice per year.

Factory Warranty Manifest Inclusions

Greenlee covers this Intellipunch kit with a 7-Year limited manufacturer warranty on hydraulic tool components and motor. The heavy blow-molded carrying case delivers the LS100X punch driver, Slug-Buster punches and dies from 1/2-inch to 4-inch, two 18V batteries, 120V charger, draw studs, and an operations manual.