Metabo KFM 18 LTX 3 RF Cordless Beveling Tool Kit

Description

Weld prep fabricators waste hours grinding irregular bevels on heavy plate edges with handheld angle grinders. The Metabo KFM 18 LTX Beveling Tool cuts precise 45-degree chamfers and radius edges using indexable carbide inserts. A roller guide follows irregular sheet contours without gouging base metal. The shallow 0.156-inch maximum chamfer depth requires multiple passes on thick plate.

Constructed with a die-cast aluminum cutter head and slim nylon motor handle, the tool resists metal chips. A brushless 18V DC motor drives the cutter spindle at 7000 unloaded RPM. The one-touch controller adjusts bevel depth in 0.004-inch steps. Net bare tool weight sits at 5.5 lbs with a 12.8-inch by 5.2-inch by 6.3-inch frame.

Key Features of Metabo 601754750

Shipyard fabricators buy Metabo 601754750 kits to prep weld seams without fire watch permits. Review trade pricing for commercial cordless plate beveling tools.

• One-touch depth controller sets precise 45-degree chamfer depths in distinct 0.004-inch mechanical detent clicks
• Indexable solid carbide cutting inserts mill oxide-free metal edges without creating heat distortion zones
• Roller guide bearing rolls across plate surfaces to prevent workpiece scratching on decorative metals
• Brushless motor delivers corded milling torque to cut clean chamfers across cold-rolled carbon steel
• Slim motor barrel grip provides secure two-handed machine control during continuous plate beveling
• Detachable metal swarf filter screen stops sharp steel milling chips from entering motor magnets
• Electronic overload protection circuit protects motor windings from thermal burnout during deep cuts
• Spindle lock mechanism permits fast carbide insert rotation using standard Torx driver bits

Carbide Cutter Chatter Chamfer Accuracy

Optical comparator inspections confirm cut edge chamfers hold true 45-degree profiles within fifteen arc minutes. Under full 0.156-inch cut depth in A36 structural steel, spindle RPM drops under four percent. Guide roller runout measures less than 0.0008 inches, eliminating ripple patterns along plate edges. Gearhead surface temperatures remain below 128 degrees Fahrenheit during continuous six-foot edge milling runs.

Plate Fabrication Rules Negative Filter

Guide this cordless beveling tool across structural plate edges, boiler tanks, and sheared steel channels. Welders prepare uniform root faces and chamfer edges for paint adhesion without creating flammable grinding dust. Do not use this precision milling tool to hog off torch-cut slag, gouge weld beads, or chamfer hardened tool steel.

• Rotate indexable carbide cutting inserts to fresh edges upon detecting increased feed resistance
• Clear steel chips from the cutter guard chamber after every thirty minutes of milling
• Wipe guide roller bearings clean of metal grit using a dry cloth each shift

Metabo Manufacturer Guarantee Delivery Manifest

Metabo protects this cordless beveling kit with a 3-Year limited warranty covering the brushless motor, electronic switches, and battery packs. The hard case includes the beveling tool, two 5.5Ah LiHD batteries, rapid charger, guide roller, carbide inserts, and Torx wrench.