Lavex 2 Gallon Solution Tank for Rotary Floor Machines

Description

Does dragging chemical buckets slow down your floor stripping production? Upgrade your rotary buffer with this Lavex 2 Gallon Solution Tank for rotary floor machines to feed chemical straight to the floor pad. This gravity-feed dispenser mounts onto 1.5-inch handle tubes. Operators must rinse the dispensing valve after using caustic wax strippers to prevent valve stick.

Translucent blow-molded polyethylene forms the 2-gallon chemical reservoir, allowing operators to monitor chemical levels at a glance. A solid brass shutoff valve connects to chemical-resistant vinyl tubing to direct fluids through the motor housing apron. Stainless steel mounting brackets and clamp collars secure the tank to 1.5-inch handle tubes. The empty tank weighs 4.2 lbs and measures 18 inches tall by 9 inches wide.

Key Features of Lavex Tank

Commercial cleaning contractors buy Lavex solution tanks to increase scrubbing efficiency without investing in expensive automatic floor scrubbers. This commercial gravity dispenser delivers precise detergent flow control for supermarket aisle scrubbing and floor finish stripping tasks.

• A 2-gallon translucent polyethylene reservoir provides visual chemical level monitoring on rotary floor machines.
• Solid brass flow control valve resists corrosion from harsh wax strippers on commercial floor buffers.
• Gravity feed system delivers 0.8 GPM chemical flow straight to the pad on floor scrubbing machines.
• Stainless steel clamp brackets secure the tank body tight onto standard 1.5-inch diameter handle tubes.
• Ergonomic steel pull-chain linkage mounts near handle grips for fingertip solution dosing control.
• Chemical-resistant vinyl delivery tubing channels detergent through the motor apron to the floor pad center.
• Wide-mouth top fill port allows fast chemical pouring from standard commercial utility sink faucets.

Hydraulic Flow Bench Leakage Tests

Technicians inspect every solution tank on our hydraulic test rig to verify seal integrity and gravity flow rates. Static hydrostatic pressure tests confirm zero fluid seepage through brass valve threads and molded tank seams. The brass dispensing valve releases fluid at an unobstructed rate of 0.8 gallons per minute under gravity feed. The pull-chain linkage operates with under three pounds of pull force without binding. Chemical soak tests prove the polyethylene body resists softening when exposed to high-pH strippers.

Installation Directives Field Application Limits

Clamp the mounting brackets around the lower handle tube, tighten the carriage bolts, and connect the fluid hose to the motor apron feed hole. Route the pull chain to the upper operator handle. Do not buy this gravity tank for pressurized high-pressure carpet extraction or high-speed burnishers.

• Flush warm clean water through the solid brass dispensing valve after using wax strippers on commercial floor buffers.
• Check clear vinyl delivery tubing for chemical residue clogs before operating gravity-feed rotary floor machines.
• Tighten stainless steel mounting bracket collar bolts to prevent 2-gallon tank slippage on 1.5-inch handle tubes.

Commercial Warranty Package Contents Manifest

Your tank purchase includes a 1-Year commercial warranty covering material defects in the molded polyethylene body, brass valve, and mounting brackets. The shipping carton contains the 2-gallon solution tank, complete mounting hardware pack, brass drain valve, vinyl feed hose, and handle chain assembly.