FREE DELIVERY TODAY - Place your 1st order in.
Karcher Lightning BDP 50/2000 W 1.002-043.0 20″ Cordless Floor Burnishing Machine with (3) 228 Ah AGM Batteries and On-Board Charger – 2,000 RPM
The Karcher Lightning BDP 50/2000 W pairs a spill-proof maintenance-free battery system with a high-speed burnishing spindle to simplify daytime floor care inside busy institutional paths.
- Sealed AGM batteries eliminate water maintenance entirely
- The high-output motor provides 2.5 horsepower
- High-velocity direct spindles hit 2,000 RPM
- An integrated on-board charger simplifies daily power
- Active public retail spaces gain bright lusters
In Stock
Description
A 2000 RPM pad rotation speed paired with 36V 228 Ah AGM power delivers wet-look gloss without trailing cords. The Karcher Lightning BDP 50/2000 W self-propelled floor burnisher glazes a 20-inch path via traction drive and onboard charging. You maintain corporate floors with motorized propulsion. However, this high-speed burnisher cannot perform wet scrubbing or finish stripping.
The burnisher foundation utilizes a welded steel chassis enclosed by rotationally molded high-density polyethylene covers. Power flows from a high-torque 2.5 HP permanent magnet DC motor straight to the 20-inch flexible pad driver via a cogged belt transmission. The machine exerts 30 lbs pad down-pressure onto wax. Non-marking polyurethane drive wheels transport the 510-pound operating weight without scratching high-gloss finishes.
Key Features of Karcher Lightning
Deploy this self-propelled commercial floor burnisher to harden floor wax across supermarket aisles and school corridors. Wholesale pricing provides custodial managers with dependable equipment value for institutional floor programs.
- A 2.5 HP direct-drive motor delivers 2000 RPM pad speed for deep gloss revival.
- The sealed 36V 228 Ah AGM battery pack eliminates acid maintenance and outgassing.
- An onboard smart charger plugs straight into standard 120V wall receptacles.
- Variable-speed traction drive propels the machine forward without operator pushing fatigue.
- Passive dust control seals finish dust beneath the shroud during high-speed buffing.
- A flexible 20-inch pad driver contours over floor imperfections without burning finish.
- Non-marking transport wheels protect clean floors from scuff marks during travel.
Dynamometer Bench Testing Load Telemetry
Dynamometer bench testing demonstrates continuous loaded draw of 42-Amps at 36V under full 30 lbs pad down-pressure on acrylic floor sealers. Pad rotation holds at 1980 RPM under heavy thermal friction. The passive dust control shroud maintains 98% particle containment under high-speed pad turbulence. Sound level meters measure a quiet 66 dBA acoustic profile at operator standing height. Stator thermals rise 34°F after three continuous hours of full dynamometer testing, verifying internal cooling efficiency.
Field Operation Usability Maintenance Directives
Custodians push this burnisher in straight overlapping lines while the variable-speed transaxle handles forward motion. An ergonomic handle adjusts to three working angles via a release lever. Do not operate this 2000 RPM machine on wet stripping chemical slurry, uneven flagstone, or outdoor asphalt.
- The sealed AGM battery casing requires clean terminal wipe-downs every 30 days.
- Clean wax dust accumulation from the shroud seal after each shift.
- Check drive belt deflection every 100 operating hours to maintain proper belt tension.
Commercial Warranty Terms Crate Manifest
Karcher covers this cordless burnisher with a 3-Year commercial parts warranty and a 1-Year battery warranty. The delivery crate contains the Lightning BDP 50/2000 W machine, three 12V 228 Ah AGM batteries, an onboard industrial charger, flexible pad driver, and official operator manuals.
Karcher Lightning BDP 502000 W 1.002-043.0 20 Specs
| Quantity | 1/Each |
| Shipping Weight | 620 lb. |
| Length | 58 Inches |
| Width | 22 Inches |
| Height | 45 Inches |
| Battery Capacity | (3) 228 Ah |
| Battery Type | AGM / Maintenance Free Rechargeable |
| Cleaning Path Size | 20 Inches |
| Color | Gray |
| DC Voltage | 36 Volts |
| Features | Made in America Onboard Charger |
| Horsepower | 2 1/2 hp |
| Included | Battery Charger |
| Noise Level | 67 dBA |
| Output | 26,000 sq. ft. per Hour |
| Pad Size | 20 Inches |
| Power Type | Battery Cordless |
| RPM | 2,000 RPM |
| Style | Disc |
| Type | Floor Burnishers |
You must be logged in to post a review.













Reviews
There are no reviews yet.