Clarke MA10 12E 12″ Corded Walk Behind Cylindrical Floor Scrubber – 0.8 Gallon

Description

Slick restaurant tile and dirty mop water cause dangerous customer falls in busy commercial facilities. Eliminate slip hazards with this Clarke MA10 12E 12″ Corded Walk behind cylindrical floor scrubber built for tight commercial spaces. This unit scrubs and recovers wash solution in one pass. Operators must empty recovery tanks on schedule to prevent float shutoff.

Corrosion-proof rotomolded polyethylene forms the dual 0.8-gallon clean solution and 1-gallon dirty recovery tanks, resisting harsh degreasers. A rigid aluminum spine encloses the 120V 800W vacuum motor and 200W cylindrical brush drive. The 12-inch nylon roller applies 26 lbs of scrubbing down-pressure at 2100 RPM to strip soil. The dry scrubber weighs 26.5 lbs, features a 40-foot safety cable, and rolls on non-marking rubber casters.

Key Features of Clarke MA10

Store managers buy Clarke MA10 floor scrubbers to maintain clean entryway floors without dealing with expensive battery replacements. This commercial corded floor scrubber delivers high brush speeds and immediate moisture extraction for gas station retail aisles.

• A 12-inch cylindrical scrub deck turns at 2100 RPM to scrub embedded dirt on commercial floor scrubber runs.
• Dual 12.6-inch polyurethane squeegee shoes provide continuous suction extraction on walk-behind floor scrubber passes.
• An 800W vacuum motor pulls 75 inches of water lift for rapid hard floor drying.
• Twin 0.8-gallon solution and 1-gallon recovery tanks resist harsh chemicals on industrial floor scrubber tasks.
• Scrub head delivers 26 lbs of continuous down-pressure to strip grease across commercial tile surfaces.
• Compact 4-inch deck clearance glides under low gondola shelving on retail floor scrubber routes.
• Heavy-duty 40-foot corded electric cable delivers uninterrupted 120V current to commercial cleaning machines.

Dynamometer Vacuum Lift Test Telemetry

Certified technicians evaluate each floor scrubber on our diagnostic test stand to measure vacuum seal and current draw under load. Bench instruments measure 75 inches of water vacuum lift through the recovery lid at 120V. Motor current draw stabilizes at 7.5-Amps while scrubbing high-traction quarry tile. Twin polyurethane squeegee shoes pick up 98 percent of wash water on single-pass runs. The sound meter records 72 dBA at operator ear level, allowing daytime facility cleaning without disturbing building occupants.

Operator Field Guidelines Application Limits

Depress the foot pedal to lower the scrub head and squeeze the handle triggers to begin washing. Walk at a steady pace to allow the cylindrical brush to scrub floor grout lines. Do not buy this compact corded floor scrubber for massive warehouse distribution centers or outdoor concrete ramps.

• Flush fresh water through the 0.8-gallon solution tank metering valve to prevent detergent clogs on commercial floor scrubbers.
• Inspect the 12-inch cylindrical nylon scrub brush roller each week to clear hair on walk-behind floor scrubbers.
• Clean dual 12.6-inch polyurethane squeegee shoes each shift to eliminate floor streaking on corded cleaning machines.

Factory Commercial Warranty Manifest Details

This commercial floor machine includes a 1-Year manufacturer warranty covering electric drive motors, vacuum blowers, and molded poly tanks. The factory shipping carton contains the 12-inch upright floor scrubber, white nylon cylindrical brush roller, dual polyurethane squeegees, detachable 40-foot power cord, and an operator manual.