Advance SC901 X32C 56115556 EcoFlex 32″ Cordless Walk Behind Floor Scrubber with 310 Ah Wet Batteries, Charger, and Brushes – 30 Gallon, 36V, 900 RPM

Description

Rotomolded polyethylene tanks and welded steel chassis frames form the rugged structural foundation of this high-productivity cylindrical machine. This Advance SC901 X32C 56115556 EcoFlex 32″ cordless walk-behind cylindrical floor scrubber cleans expansive logistics facilities using 310 Ah wet batteries. Operating at 900 RPM, this machine sweeps and scrubs a 32-inch path. Operators must monitor water levels on schedule.

Industrial rotomolded polyethylene forms the massive 30-gallon solution and 30-gallon recovery reservoirs, withstanding collisions with pallet racking. A welded tubular steel chassis supports the 36V 310 Ah wet battery bank, industrial drive motor, and EcoFlex chemical blending module. The 32-inch cylindrical scrub head applies up to 200 lbs of down-pressure with an integrated hopper. The machine weighs 1190 lbs with batteries.

Key Features of Advance SC901

Distribution center operations managers buy Advance SC901 32C EcoFlex scrubbers to wash dusty warehouse floors in half the time of disc scrubbers. This commercial battery walk-behind cylindrical floor scrubber provides integrated debris collection and EcoFlex detergent metering across transport depots.

• Dual 32-inch cylindrical scrub brushes spin at 900 RPM on industrial walk-behind floor scrubbers.
• High-capacity 36V 310 Ah wet deep-cycle battery bank supplies up to 4.5 hours of floor scrubbing runtime.
• EcoFlex onboard chemical mixing system dispenses water and soap accurately to eliminate chemical waste.
• Integrated sweeping hopper collects solid packaging debris ahead of brushes to prevent squeegee clogs.
• Adjustable scrub deck exerts up to 200 lbs of downward contact force to strip impacted grease.
• Large 30-gallon solution and 30-gallon recovery tanks minimize chemical refill stops on large jobsites.
• Heavy cast aluminum 37-inch squeegee frame recovers dirty wash water on sharp commercial floor turns.

Heavy Cylindrical Dyno Bench Telemetry

Technicians test every SC901 cylindrical machine on our computerized test platform to measure brush motor draw and transaxle torque under load. Twin cylindrical motors pull 34-Amps at 36V under full 200 lb down-pressure on test concrete. The 310 Ah battery bank delivers uninterrupted power across 4.5 hours of continuous testing. Squeegee suction transducers measure 70 inches of water lift.

Field Operation Directives Negative Filter

Lower the scrub head and squeegee with the control levers, engage forward drive, and press the drive paddles. Guide the machine forward in overlapping lines across dirty floor surfaces. Do not buy this heavy 1190 lb walk-behind machine for cramped residential layouts or second-story clinics lacking elevators.

• Empty the heavy-duty cylindrical sweep hopper after every industrial floor scrubbing shift.
• Check electrolyte water levels in the 36V 310 Ah wet batteries each week on commercial floor scrubbers.
• Inspect the 37-inch curved squeegee rubber blades for tears to ensure streak-free water recovery.

Commercial Warranty Factory Delivery Manifest

This industrial scrubber carries a 3-Year warranty on parts, 2-Year warranty on labor, and an 8-Year warranty on rotomolded poly tanks. The wooden freight pallet contains the Advance SC901 X32C scrubber, 36V 310 Ah wet battery set, shelf charger, two cylindrical brushes, and an operator manual.