Makita 18V LXT Rotary Hammer 1in with HEPA Dust Extractor Attachment (Bare Tool)

Description

Airborne silica dust clouds trigger OSHA fines and pose severe respiratory health hazards during commercial concrete anchor installation. The Makita 18V LXT Rotary Hammer 1in with HEPA Dust Extractor bare tool captures concrete dust directly at the hole collar. An 18-volt brushless motor delivers 1.7 foot-pounds of impact energy at 4700 blows per minute. Pushing solid bits beyond one-inch diameter limits stalls the motor.

Die-cast aluminum gearcases house an air-cushioned striker mechanism supported by double-row ball bearings. Anti-vibration handle linkages decouple reciprocating striker shock from technician hands. The HEPA dust extractor mounts directly onto the hammer chassis, drawing vacuum power from an independent motor drive. Torque-limiting clutches decouple the motor drive within milliseconds if the drill bit binds in structural rebar cages.

Rotary Hammer Dust Extractor Specs

Integrated HEPA vacuum attachments capture airborne silica dust to meet OSHA Table 1 compliance standards. Dedicated extractor motors maintain maximum suction without robbing drilling power from the hammer.

• 1.0-inch solid bit capacity cuts commercial structural anchor holes in reinforced slabs
• 1.7 foot-pounds of impact energy shatters high-strength concrete aggregate effortlessly
• Brushless 18-volt motor platform provides high impact cadence with low battery power drain
• Mechanical torque limiter protects drive gears and operator wrists during bit bind-up
• Integrated HEPA dust extractor vacuums silica particles directly at the drill hole mouth
• Translucent dust box allows operators to view concrete dust fill levels during drilling
• SDS-plus tool chuck permits rapid bit changes with single-hand pull-back collars

Hammer Dyno Bench Readings

Bench power analyzers track electrical current draw and impact energy across high-strength cured concrete. Running unloaded, the 18-volt battery draws 2.2 amperes, climbing to 24.6 amperes while driving a 3/4-inch carbide bit. Battery terminal voltage drops from 18.2 volts down to 15.8 volts under peak hammering resistance. Striker cadence hits 4700 BPM under active load. Sound level meters read 90 dBA at the operator position. Gearcase temperatures rise 22 degrees Fahrenheit after twenty holes.

Field Service Operational Traps

Clogged HEPA filters choke vacuum suction and allow toxic silica dust into the air. Interior drywall installers hanging light pictures have no use for this heavy concrete drill. Never run the hammer without emptying full dust extractor canisters.

• Empty the dust extractor collection box before concrete powder reaches the fill line.
• Tap HEPA filter pleats clean over a trash bin after every twenty drilled holes.
• Grease SDS-plus bit shanks with high-pressure chisel lubricant before every work shift.

Commercial Warranty Package Inventory

Makita backs this rotary hammer bare tool with a 3-Year limited commercial warranty. The bare-tool package contains the 1-inch rotary hammer, onboard HEPA dust extractor, side handle, depth stop rod, and operator instruction manual.