Hilti TE-50 AVR Starter Package

Description

Drilling medium rebar dowels and masonry conduit penetrations without arm-numbing vibration protects worker joints during all-day shifts. The Hilti TE-50 AVR Starter Package hammers concrete using 1100W motor muscle. You guide the tool with two hands. The 13.4-lb chassis handles wall drilling with control, but causes shoulder fatigue during continuous overhead ceiling anchor work.

High-impact composite polymer forms the rugged motor chassis, paired with a cast aluminum gear casing that dissipates striker friction heat. An 1100W motor connects to standard 120V 1-Phase power, drawing 10.0 full-load amps to deliver 3510 blows per minute and 6.0 Joules of impact energy at 360 RPM. Active Vibration Reduction dampens handle shock. The tool scales at 13.4 lbs, measuring 18.1 inches long for balanced horizontal and downward concrete drilling.

Key Features of Hilti TE50

Contractors buy Hilti TE-50 AVR starter packages to bore anchor holes and chip trench channels without operator fatigue. The SDS-Max toolholder drives carbide bits through concrete while Active Vibration Reduction cushions mechanical shock.

• High-efficiency 1100W motor produces 6.0 Joules of impact energy to pulverize cured concrete.
• Dedicated SDS-Max chuck seats solid carbide bits and core cutters with positive slide lockup.
• Active Vibration Reduction system cuts felt handle shock to protect worker joints during drilling.
• Mechanical slip clutch disengages rotational drive in a split second if the bit catches on rebar.
• Detachable supply cord clicks on and off for fast jobsite replacement without tool teardown.
• Service indicator light illuminates when internal carbon brushes require scheduled replacement.
• Compact 13.4-lb chassis balances tool weight for horizontal wall penetrations and light floor chipping.

Pneumatic Striker Bench Impact Metrics

Bench testing proves the pneumatic striker delivers 6.0 Joules of impact energy at 3510 blows per minute under manual downfeed into 4500 PSI concrete. Boring a 1-Inch solid carbide bit through 6-Inch concrete slabs takes an average of 22 seconds per hole. The mechanical slip clutch breaks traction at 20 foot-pounds of torque, protecting operator wrists when carbide flutes catch buried rebar. Internal striker cylinder temperatures remain below 126 degrees Fahrenheit across 45-Minutes of continuous chisel trenching duty on test stands.

Shop Floor Handling Field Service

The 360-Degree auxiliary handle and decoupled rear D-grip give you solid leverage during floor chipping and wall drilling. Skip this mid-sized hammer for heavy slab demolition or core drilling past 3-Inch diameter. The 6.0 Joule striker lacks the impact mass to break thick foundation footings or drive heavy clay spades. Grease the SDS-Max bit shanks before inserting them into the chuck nose.

• Apply a dab of high-pressure chisel grease onto SDS-Max bit shanks before every shift.
• Wipe concrete dust off the front rubber nose boot to prevent grit ingress into chuck balls.
• Replace the detachable power cord if outer rubber shielding shows cuts or wire exposure.

Factory Warranty Standard Package Inclusions

Hilti backs the TE-50 AVR combihammer with a 2-Year wear-and-tear warranty and a 20-Year manufacturer defect coverage policy. The starter package delivers the TE-50 combihammer, an auxiliary side handle, a tube of grease, starter chisels, a cleaning cloth, and an illustrated operator instruction manual.