Exact Tools PipeCut 170E Electric Pipe Cutting System

Description

A broad 0.6-inch to 6.7-inch cutting range gives the Exact Tools PipeCut 170E Saw System great utility across mechanical rooms. This corded pipe saw cuts steel, cast iron, copper, and plastic pipe with pure square accuracy. The roller carriage rides pipe contours without runout. The tool requires manual forward rotation around the pipe.

Die-cast aluminum forms the motor mount and pipe carriage assembly to shed weight while maintaining chassis rigidity. A 120-volt AC commutator motor draws 8.4 full-load amps, producing ten hundred ten watts of continuous cutting power. The variable-speed electronic controller modulates arbor speeds between sixteen hundred and four thousand RPM. Total bare saw weight is 12.6 lbs, measuring 12.2 inches long by 7.5 inches wide.

Key Features of Exact PipeCut 170E

Commercial pipefitters buy Exact PipeCut 170E systems to ditch chop saws and eliminate pipe deburring delays in mechanical rooms. Competitive commercial pipe saw pricing lowers labor hours on chilled water and fire sprinkler installations.

• Roller carriage wraps around pipes up to six inches diameter for dead-square cuts.
• Variable speed selector matches arbor RPM to stainless steel, carbon steel, or plastic pipe.
• Integrated vacuum attachment port pulls metal and plastic shavings away from the operator.
• Cold cutting process eliminates hot sparks and open flames in active hospital retrofits.
• Quick-release pipe clamp locks the tool onto pipe sections without extra shop wrenches.
• Lightweight aluminum frame allows single-worker positioning on overhead pipe runs.
• Four pipe support rollers hold long sections level for safe shop floor cutting.

Spindle Runout Bench Test Calibration

Dial indicator testing records arbor spindle runout of 0.0006 inches total indicator reading at full four thousand RPM. Across four-inch Schedule 40 carbon steel pipe, severance time averages 32 seconds with blade face squareness inside 0.020 inches. Motor speed under heavy cut resistance drops eight percent from set RPM while maintaining clean chip formation. Motor temperature rise stabilizes at twenty-nine degrees Fahrenheit during four back-to-back pipe severances. The blade guard return spring retains full tension across five hundred mechanical cycles.

Mechanical Room Usability Maintenance Directives

The compact chassis slips into crowded pipe chases where abrasive cut-off wheels cannot fit without catching adjacent conduits. Feed pressure requires steady two-handed carriage guidance. However, do not purchase this saw for concrete sewer pipe, ductile iron water mains over six inches, or heavy structural steel beams.

• Clear metal cutting chips out of the roller wheel axles after every shift.
• Check the carbide saw blade for dull or cracked teeth before cutting stainless.
• Blow carbon brush dust out of motor housing vents once a month.

Factory Warranty System Crate Manifest

Exact Tools covers this electric pipe saw with a 1-Year warranty against material defects and electrical armature faults. The carton includes the PipeCut 170E saw, one ceramic pro blade, four pipe support rollers, hex keys, a heavy shoulder bag, and the official technical operation manual.