Milwaukee M18 FORCE LOGIC 750 MCM Crimper Kit

Description

Commercial electricians fight muscle exhaustion when hand pumping twelve-ton crimpers on thick service entrance feeders. The Milwaukee M18 FORCE LOGIC Crimper Kit delivers twelve tons of hydraulic force through heavy copper lugs. This battery tool handles up to 750 MCM cable connections without cumbersome external hoses. Its wide frame limits access in crowded six-inch gutter boxes.

High-impact engineered polymer forms the main handle shell, mated to a heat-treated steel jaw receiver. A four-pole frameless motor drives the planetary gearbox and dual-stage hydraulic piston assembly at eighteen volts DC. The motor draws twenty-two full-load amps during maximum ram extension. Bare tool weight hits 11.7 lbs, expanding to 16.5 lbs with jaw and battery installed. The chassis measures 16.8 inches long by 4.8 inches wide.

Key Features of Milwaukee 2779-82

Electricians buy Milwaukee 2779-82 units to certify heavy feeder connections across industrial switchgear installations. Competitive pricing delivers commercial crimper reliability that satisfies strict electrical inspection standards on big projects.

• Predictive force monitoring calculates hydraulic pressure to verify code-compliant wire termination every single cycle.
• Rotating 350-degree head orientation allows crimping inside congested panelboard troughs and wireways.
• Integrated green LED indicator provides positive visual confirmation of complete pressure delivery.
• Balanced center of mass reduces forearm fatigue during repetitive termination runs on commercial panels.
• Heavy steel U-style head accepts standard industry dies for uniform lug compression.
• Sealed pump body keeps copper shavings and drywall dust away from internal hydraulic oil.
• Quick release lever opens jaw mechanics if an incorrect cable size causes a bind.

Feeder Crimp Pressure Bench Verification

Load cell testing records full twelve-ton thrust at five point eight seconds into the compression stroke. Hydraulic pressure reaches nine thousand eight hundred PSI against 750 MCM copper splices. The internal pressure sensor holds less than one percent calibration drift across two thousand simulated cycles. Motor temperature climbs thirty-four degrees Fahrenheit during ten consecutive heavy cycles without tripping thermal cutoffs. Ram retraction takes 1.8 seconds, returning the die carriage to home position for the next compression pass.

Jobsite Handling Maintenance Protocols

The dual-finger trigger offers positive control even when wearing thick lineman leather gloves. The substantial mass demands two hands for stable horizontal alignment on tall distribution racks. Do not purchase this tool for light residential branch circuit wiring or small gauge terminal block pin terminations.

• Purge hydraulic cylinder air by cycling the ram without dies after fluid inspections.
• Clean die retention slots with brass bristle brushes to dislodge copper slivers.
• Lubricate head pivot bearings with lithium grease after fifty hours of active crimping.

Factory Support Kit Inclusions

Milwaukee protects this crimping unit with a 5-Year warranty on the tool body and hydraulic pump. The crate contains the 750 MCM crimper, two M18 REDLITHIUM XC5.0 battery packs, one multi-voltage charger, a heavy-duty molded transport case, and complete manufacturer operational documentation.