Greenlee 6 Ton Battery Crimper with CJD3 Head Kit

Description

Forged alloy steel forms the CJD3 jaw head that endures six tons of compressive force across thousands of overhead distribution terminations. The Greenlee EK425LXD11 6 Ton Crimper includes batteries and a charger to compress overhead taps. It speeds utility work, though operators must verify die seating before pulling the trigger aloft.

High-strength glass-reinforced nylon forms the motor housing, paired with a forged alloy steel CJD3 jaw that withstands six tons of compressive force. Powered by an 18-volt DC motor, the compact hydraulic pump generates 10000 PSI operating pressure inside a sealed system. The tool with battery weighs 6.8 lbs, measuring 14.5 inches long by 3.0 inches wide by 4.5 inches high. A 350-degree rotating head eases line access.

Key Features of Greenlee EK425LXD11

Utility linemen looking to buy Greenlee EK425LXD11 kits complete overhead distribution splices and secondary taps with single-handed balance. Professional contractor pricing reflects the six-ton hydraulic platform, proven CJD3 jaw, and complete two-battery charging kit.

• Delivers six tons of hydraulic force across an industry standard CJD3 jaw head.
• Accepts standard W-style dies for overhead distribution taps and sleeves.
• Intelli-CRIMP technology verifies full cycle pressure with visual LED signals.
• Head rotates 350 degrees to access angled conductors in cramped bucket workspaces.
• Two-stage hydraulic pump delivers rapid ram advance to cut cycle times.
• Inline linear frame balances in one hand to reduce operator shoulder strain.
• Kit includes two 18-volt lithium batteries and a rapid 120-volt charger.
• Automatic retraction returns the ram once target tonnage registers on sensors.

CJD3 Head Hydraulic Force Metrics

Compressing 4/0 ACSR distribution sleeves in the CJD3 jaw draws 9600 PSI hydraulic line pressure. Ram cycle duration completes full connector compression in 2.7 seconds from trigger pull. Jaw cheek deflection measures under 0.0016 inch under peak six-ton load. Intelli-CRIMP sensors record target pressure within one percent across one hundred consecutive utility terminations. Hydraulic oil temperature stabilizes at eighteen degrees Fahrenheit above ambient levels after thirty cycles on utility staging benches without fluid weepage around the ram seals on overhead line construction tests in cold outdoor weather conditions.

Bucket Line Rigging Negative Filter

The slender inline barrel balances in one hand aloft, making overhead pole line terminations manageable inside crowded bucket trucks. The trigger actuates through heavy insulated rubber gauntlets, while green LED indicators confirm complete cycle tonnage. Do not buy this six-ton bare tool for heavy underground transmission cable exceeding 4/0 AWG.

• Wipe conductive paste and road film off the CJD3 jaw after each shift.
• Inspect die retention spring detents for positive locking action once a week.
• Clean the linear barrel casing with a clean cloth once a month.

Greenlee CJD3 Kit Warranty Terms

Greenlee covers this six-ton crimper kit with a 7-Year commercial manufacturer warranty. The factory package contains the EK425LXD crimper tool, two 18-volt lithium batteries, a 120-volt rapid charger, heavy plastic transport case, calibration test sheet, and the technical operator safety instruction manual booklet.