TPI Corporation 24In Assembled Industrial Air Circulator Head Safety Yellow 1/2HP

Description

High ambient heat in metal fabrication bays bogs down plant workers and causes premature equipment motor overheating. The TPI 24In Industrial Circulator Head blasts 6,800 CFM of high-velocity air across hot workstations. It comes as an assembled bare fan head, requiring you to bolt it onto a compatible wall arm, ceiling drop, or pedestal base.

Heavy-gauge steel wire constructs the safety guards, coated in OSHA-compliant safety yellow powder paint and paired with three cast aluminum fan blades. A continuous-duty totally enclosed air-over 0.5 HP motor draws 5.4 full-load amps on standard 120V 60Hz single-phase wall circuits at 1,725 RPM. Total dry bare fan weight measures 38 lbs. Guard diameter spans 27 inches across with a 14-inch overall depth.

Key Features of TPI 24 Circulator

Plant maintenance engineers buy TPI 24 Circulator heads to replace worn fans and keep fabrication crews cool during summer production runs. Industrial pricing delivers heavy 1/2 HP motor power designed to operate non-stop in harsh shop conditions.

• Three balanced cast aluminum fan blades move 6,800 CFM of high-velocity air to break up industrial heat pockets.
• Totally enclosed air-over 0.5 HP electric motors seal out grinding swarf, sawdust, and cutting oil mist.
• OSHA safety yellow wire guards ensure high visual awareness in busy forklift staging and crane traffic aisles.
• Universal yoke mount brackets attach to wall arms, ceiling drops, beam clamps, or floor pedestals.
• Two-speed pull chain switches select between gentle air circulation and maximum high-velocity CFM air throw.
• Permanently lubricated motor ball bearings provide smooth rotor rotation without requiring routine oil service.
• Grounded twelve-foot industrial power cords reach remote electrical receptacles without drop cord splices.

Air Velocity Motor Bench Metrics

Air velocity bench evaluations confirm 6,800 CFM on high speed with centerline air velocity measuring 1,450 feet per minute at five feet. Cast aluminum blade balance tests show under 0.001 inches of radial runout, eliminating motor shaft vibration chatter. The TEAO motor runs cool, with case temperatures rising just 28 degrees Fahrenheit above ambient over eight hours of continuous testing. Current draw holds steady at 5.1 running amps on 120V power lines. Sound meter tests record 72 dB at ten feet away.

Mounting Usability Realities Maintenance

Bolting this 38 lb fan head onto a wall bracket takes one worker using the heavy steel yoke bolt and locking washer. Tilting the fan head requires loosening the pivot friction bolt before setting angle. Do not buy this air circulator head for wet wash bays, paint spray booths, or grain elevators.

• Blow shop dust and grit off the motor cooling housing using compressed air once each month.
• Wipe industrial grease and oil film off the aluminum blades every two months.
• Inspect the yoke bracket mounting hardware for vibration loosening twice per year.

Factory Warranty Manifest Inclusions

TPI Corporation backs this safety yellow fan head with a 1-Year limited manufacturer warranty against defects in materials. The factory carton packaging contains the assembled 24-inch fan head, 0.5 HP motor, steel yoke mounting bracket, industrial power cord, and an illustrated installation operations guide.