Sunex Shield For 20 Ton Aluminum Shop Press

Description

Heavy 12-gauge cold-rolled carbon sheet steel constructs the cyclone cone and frame of the Powermatic PM2200 Cyclonic Dust Collector for severe production shop service. This 3.0 HP two-stage unit pulls 1,543 CFM across central ductwork drops. It requires hardwired 230V single-phase electrical service, preventing simple plug-in operation on common 115V convenience circuits.

Heavy structural plate steel forms the cyclone separation chamber and support stand, finished in classic Powermatic mustard yellow industrial powder paint. An industrial TEFC induction motor outputs 3.0 HP, drawing 15 full-load amps on 230V 60Hz single-phase wall circuits at 3,450 RPM. Total dry bare machine weight reaches 410 lbs. Assembled floor dimensions measure 56 inches long, 34 inches wide, and 88 inches tall.

Key Features of Powermatic PM2200

Commercial millwork plants buy Powermatic PM2200 cyclonic systems to run continuous extraction across wide-belt sanders, CNC routers, and heavy shapers. Machinery pricing delivers two-stage cyclone separation and auto-cleaning canister filtration for production shops.

• Industrial 3.0 HP TEFC induction motors drive continuous high-vacuum suction across multi-drop duct networks.
• Two-stage cyclone separation drops ninety-five percent of wood chips into drums before dust reaches filters.
• Certified two-micron pleated canister filters capture 99 percent of microscopic airborne wood dust particles.
• Automated motor-driven filter cleaner arms sweep caked dust off the canister pleats every five minutes.
• Heavy 63-gallon lower steel collection drums hold high chip volumes to cut production emptying cycles.
• One-handed quick-lever drum disconnects lower the waste barrel onto swivel casters for fast disposal.
• Radio-frequency wireless remote controls turn the collector on or off from machine stations across the shop.

Static Pressure Cyclone Bench Metrics

Airflow bench evaluations confirm 1,543 CFM output through an eight-inch inlet against 4.2 inches of static water-gauge resistance. Maximum static pressure peaks at 11.2 inches water gauge with intake ports closed. Dynamic impeller balance shows under 0.001 inches TIR runout on the motor drive shaft, eliminating vibration hum. Current draw stabilizes at 14.2 FLA on 230V lines under full load without motor overheating. Operating sound meters register 76 dB at six feet away without housing rattle.

Woodshop Usability Realities Maintenance

Assembling this 410 lb cyclone requires two workers, overhead rigging chains, and three hours to bolt the stand together. Emptying the 63-gallon waste drum takes one worker rolling the wheeled barrel out to scrap dumpsters. Do not buy this machine for hot metal grinding sparks, concrete silica extraction, or wet plumbing slurries.

• Empty the 63-gallon lower steel drum before wood chips rise into the cyclone cone.
• Check that the automated canister cleaning sweep arms engage when shutting down the motor.
• Inspect the drum rim rubber compression gasket for air leaks once every month.

Factory Warranty Manifest Inclusions

Powermatic covers this cyclonic dust collector with a 5-Year limited manufacturer warranty against defects. The heavy wood crate shipment includes the 3.0 HP motor blower assembly, cyclone cone, structural stand, pleated canister filter, 63-gallon drum on casters, wireless remote control, and a field assembly manual.