National Flooring Equipment 115V Dust Collector

Description

Choked by dangerous silica dust clouds drifting behind your concrete floor grinders on commercial remodeling jobs? The National Flooring 115V Dust Collector captures fine respirable dust at 200 CFM to meet OSHA limits. It draws 15 amps on 115V power, requiring a dedicated 20-amp branch circuit to avoid nuisance breaker trips during heavy grinding loads.

Heavy 16-gauge rolled carbon sheet steel constructs the cylindrical separation drum and motor housing, finished in durable industrial blue powder paint. Two commercial electric bypass vacuum motors draw 15 full-load amps on standard 115V 60Hz single-phase wall circuits. Total dry bare machine weight measures 85 lbs. Machine footprint dimensions measure 22 inches wide, 24 inches deep, and 42 inches tall on large rear wheels.

Key Features of National 115V Collector

Surface prep contractors buy National 115V Collector systems to extract silica dust behind hand grinders and small floor scarifiers. Equipment pricing delivers HEPA-certified filtration and continuous-bagging disposal for commercial flooring jobs.

• Dual bypass electric vacuum motors produce 200 CFM of volume flow and 100 inches of static water lift.
• Certified primary HEPA filter media captures 99.99 percent of dangerous airborne silica dust down to 0.3 microns.
• External manual filter shaker handles dislodge caked concrete dust into collection bags without opening drums.
• Heavy rolled steel vacuum drums resist dent damage from dropped hand tools and rough construction transport.
• Continuous Longopac drop bag systems allow dust disposal without exposing workers to airborne silica dust.
• Included 25-foot heavy-duty flexible vacuum hoses provide wide working radiuses around floor grinders.
• Commercial two-piece floor wand kits with wide floor squeegee attachments speed up slab cleanup passes.

Vacuum Static Suction Bench Metrics

Vacuum bench testing confirms 200 CFM of volume flow and 100 inches of static water-gauge lift at the hose inlet. Dual motors draw 14.8 running amps on 115V circuits under full suction load without thermal cutout trips. The HEPA filtration chamber maintains 99.99 percent capture efficiency across twenty consecutive slab grinding passes before backpressure builds. Operating sound meter tests record 76 dB at six feet away. Gaskets maintain airtight seals up to 105 inches of vacuum pressure with zero air bypass.

Flooring Usability Realities Maintenance

Rolling this 85 lb vacuum over rough broom-finished concrete slabs takes light effort on the rear tubular push handle. Shaking the internal filter takes three pumps on the external shaker rod. Do not buy this vacuum for wet slurry extraction, hot metal grinding sparks, or combustible wood dust environments.

• Pump the manual filter shaker rod five times before shutting down the vacuum motors.
• Tie off and replace the continuous collection bag roll before concrete dust exceeds 45 lbs.
• Inspect the rubber intake hose gaskets and wand couplers for suction leaks every week.

Factory Warranty Manifest Inclusions

National Flooring Equipment covers this dust collector with a 1-Year manufacturer warranty on motors and chassis components. The heavy carton shipment delivers the complete 115V vacuum, HEPA filter pack, 25-foot vacuum hose, two-piece floor wand, floor tool attachment, Longopac bag roll, and an OSHA compliance guide.