Heatstar Long Duct for HS115TC NOMAD

Description

Gear-driven oscillation sweeps three balanced aluminum blades inside the TPI 30in Oscillating Pedestal Fan to circulate cooling air across factory bays. This commercial pedestal circulator moves 6,000 CFM across wide production areas. It pushes high-velocity airflow through an open motor, requiring placement away from wet washdown zones and flammable paint booths.

Heavy-gauge steel wire forms the OSHA-compliant finger guards, mounted on an adjustable tubular steel pole and heavy cast iron base. An open-ventilated commercial motor draws 2.7 full-load amps on standard 120V 60Hz single-phase wall circuits at 1,100 RPM, producing 1/4 HP. Total dry tool weight measures 72 lbs. The heavy circular base spans 28 inches in diameter, adjusting from 50 to 68 inches tall.

Key Features of TPI 30 Oscillating

Maintenance foremen buy TPI 30 Oscillating fans to cool workers across open fabrication bays, assembly lines, and warehouse docks. Equipment pricing delivers commercial oscillating motor hardware that outlasts consumer-grade pedestal fans on tough industrial shop floors.

• Three balanced aluminum fan blades move 6,000 CFM of high-velocity air across hot workstations.
• Internal gear-driven oscillation mechanisms sweep the fan head across ninety degrees for wide area air coverage.
• OSHA-compliant steel wire safety guards prevent accidental finger contact with spinning aluminum blades.
• Heavy cast iron base plates keep the tall pedestal fan upright against accidental hand truck bumps.
• Telescoping tubular steel poles adjust operating height from 50 to 68 inches for directed airflow control.
• Dual-speed pull chain switches select between gentle circulation and maximum high-velocity CFM air throw.
• Grounded ten-foot industrial power cords reach remote wall receptacles without extension cord hazards.

Oscillating Air Velocity Bench Metrics

Air velocity bench evaluations confirm 6,000 CFM on high speed with centerline air velocity measuring 1,320 feet per minute at five feet. Oscillating gear drive tests show steady ninety-degree sweeps without mechanical gear binding or gear-head chatter. The motor runs cool, with case temperatures rising just 26 degrees Fahrenheit above ambient over six hours of continuous operation. Electrical draw stabilizes at 2.6 running amps on 120V lines. Sound level meter testing records 70 dB at ten feet away.

Shop Usability Realities Maintenance

Adjusting pole height takes two hands on the threaded locking collar, lifting the fan head to desired height before tightening down firm. The 72 lb weight keeps the pedestal planted firm on concrete slabs. Do not buy this open-motor fan for wet wash bays, explosive spray paint rooms, or dusty grain elevators.

• Blow shop dust and lint off the motor casing using compressed air once each month.
• Wipe road grime and cutting oil film off the aluminum blades every two months.
• Check the base pole clamp bolt for tightness before moving between work areas.

Factory Warranty Manifest Inclusions

TPI Corporation backs this commercial pedestal fan with a 1-Year limited manufacturer warranty against defects. The factory carton packaging contains the 30-inch fan head, oscillating motor assembly, telescoping pole, cast iron base plate, hardware fasteners, and an illustrated operations manual.