FREE DELIVERY TODAY - Place your 1st order in.
Wacker Neuson APS1135WE Battery Vibratory Plate Bare Tool
To eliminate asphalt surface tearing and toxic engine exhaust inside enclosed pathways, the Wacker Neuson APS1135WE Battery Vibratory Plate (Bare Tool) uses an integrated sprinkler over a 13.8-inch plate.
- Integrated water tank prevents asphalt adhesion
- 13.8-inch baseplate navigates tight trenches
- Push-button starting eliminates manual pull cords
- Battery drive produces zero exhaust emissions
- Bare compactor weighs 138.89 pounds
In Stock
Description
Asphalt repair crews choke on exhaust fumes whenever gasoline compactors run inside enclosed courtyards and parking basements. The Wacker Neuson Battery Water Plate Bare unit resolves this problem with zero-emission battery power and water sprinkler capability. Because this bare unit excludes batteries, chargers, and water tanks, you must furnish compatible components before starting work.
Wear-resistant ductile cast iron forms the 13.8-inch wide base plate, tapered at leading edges to prevent hot bitumen pickup. Operating weight sits at 138 lbs without the battery installed. A direct-drive brushless electric motor powers the exciter to 5,880 VPM, generating 2,473 lbs of centrifugal compaction force. Heavy rubber isolation bushings protect the steering handle, while sealed IP54 enclosures block moisture and asphalt dust from internal electronics.
Key Features of Wacker 5100059661
Paving specialists who buy Wacker 5100059661 bare units secure competitive commercial battery compactor pricing while meeting strict emissions limits on indoor asphalt and landscape repair jobs.
- Zero emissions direct-drive electric motor enables safe continuous asphalt compaction inside parking structures
- Ductile cast iron base plate resists severe aggregate abrasion and delivers 2,473 lbs of compaction force
- Integrated water sprinkler mounts allow quick installation of asphalt water kits to stop bitumen pickup
- Push button start eliminates pull cord fatigue and cold-weather starting frustrations on wet jobsites
- Low hand-arm vibration guide handle reduces operator fatigue to support extended daily compaction shifts
- Sealed brushless motor and exciter require zero engine oil changes or air filter replacements
- Compact 13.8-inch operating width maneuvers between narrow foundation footings and trench walls
Asphalt Compaction Bench Load Testing
Bench accelerometer analysis confirms this plate generates 2,473 lbs of centrifugal force at 98 Hz exciter frequency. Forward travel speed reaches 62 feet per minute across hot asphalt test beds. Hand-arm vibration sensors register under 2.4 meters per second squared at the steering handle, protecting workers from nerve strain. In live tests on 2-inch asphalt lifts, the plate achieved 96 percent Marshall density in three passes without bitumen pickup, surface tearing, aggregate shoving, or motor bogging.
Field Usability Realities
Guiding this 138 lb plate compactor feels nimble thanks to its narrow 13.8-inch footprint and balanced weight distribution. Fold-down wheels simplify rolling across cured concrete curbs. Do not buy this single-direction bare plate for deep trench utility backfills in sticky clay or high-production highway mainline asphalt paving.
- Blow dirt and rock dust from battery compartment terminals using dry compressed air
- Wipe base plate and exciter housing with a damp cloth after working in hot asphalt
- Check guide handle rubber vibration isolators for cracking or looseness every month
Wacker Neuson Warranty Manifest
Wacker Neuson protects this bare-tool vibratory plate with a 2-Year limited warranty covering the chassis, brushless motor, and internal exciter mechanism. The factory pallet delivers the APS1135WE bare plate, integrated transport wheels, folding guide handle, and an illustrated technical operation and service manual for immediate field setup.
Wacker Neuson APS1135WE Battery Vibratory Plate Bare Specs
| Brand Name | Wacker Neuson |
| Assembled Weight (lbs) | 138.89 |
| Batteries Included | No |
| Charger Included | No |
| Country of Origin | China |
| Ground Clearance (in) | 26.1 |
| MFG Part # (OEM) | 5100059661 |
| Number of Batteries Included | 0 |
| Package Contents | Vibratory Plate - Bare Tool |
| Package Depth | 23.6 |
| Package Depth UOM | IN |
| Package Height | 26.1 |
| Package Height UOM | IN |
| Package Weight | 138.89 |
| Package Weight (lbs) | 138.89 |
| Package Width | 13.8 |
| Package Width UOM | IN |
| Product Condition | New |
| Restrictions | CA Prop 65 |
| Size | 23.6 In. Length Baseplate x 13.8 In. Width x 26.1 In. Height |
| Start Type | Push |
| Temperature Range | 14 to 122 deg F |
| UPC | 400100011997 |
| Warranty Type | 1 Year |
You must be logged in to post a review.

















Reviews
There are no reviews yet.