Wacker Neuson ACBe Modular Battery-Powered Internal Vibrator (Bare Tool)

Description

Solid-state electronic inverter circuits convert battery direct current into high-frequency electricity when the Wacker Neuson ACBe Battery Concrete Vibrator powers on. Worn on an ergonomic backpack harness, this bare power converter drives high-frequency vibrator heads without cords. Because this bare unit omits the BOB battery and charger, you must furnish compatible power packs before operating.

Molded high-impact polymer and aluminum form the backpack carrier frame, holding dry converter weight to 17.6 lbs. Running on a 51V lithium-ion battery platform, the integrated inverter outputs 42V three-phase current at 200 Hz to drive internal vibrator heads up to 2.3 inches. Machine dimensions measure 22 inches high, 15 inches wide, and 12 inches deep. Ergonomic padded straps transfer load across worker hips during long placements.

Key Features of Wacker 5100058345

Commercial concrete crews looking to buy Wacker 5100058345 bare converters gain fair commercial battery vibrator pricing while eliminating cord tripping hazards and gas exhaust on bridge flatwork.

• Solid-state electronic inverter transforms battery power into 42V three-phase high-frequency output
• Zero emissions architecture enables continuous internal concrete consolidation inside enclosed basements and tunnels
• Ergonomic padded backpack harness distributes converter weight across shoulders and hips to reduce fatigue
• Quick-disconnect electrical coupler attaches to Wacker IE series high-frequency vibrator heads in seconds
• Push button start eliminates pull cord strain and engine choke adjustments on early morning pours
• Double insulated electronics block moisture ingress during jobsite washdown and wet placement conditions
• Lightweight eighteen-pound bare weight reduces physical strain during continuous all-day bridge deck pours

High Frequency Inverter Bench Testing

Bench dynamometer testing under full load confirms the internal solid-state inverter maintains steady 42V three-phase output at 200 Hz, driving a 2.3-inch head at 12,000 VPM in 2.5-inch slump concrete with zero frequency drop. Thermal sensors record inverter heat sink temperatures below 135 degrees Fahrenheit across a full battery discharge cycle. The electrical system delivers constant consolidation torque across 40 cubic yards of concrete per charge, eliminating air voids without stator overheating or thermal inverter cutout.

Field Usability Realities

Wearing this 17.6 lb backpack feels natural, and the hip belt transfers load away from the spine. The power switch operates with thick rubber work gloves. Do not buy this cordless converter for jobs lacking Wacker BOB batteries or without high-frequency 42V vibrator heads.

• Blow concrete dust from battery terminal slots using dry compressed air after each pour
• Wipe down backpack frame and harness straps with a damp towel rather than spraying water
• Inspect high-frequency quick-connect pins for moisture or paste residue before locking in heads

Wacker Neuson Warranty Manifest

Wacker Neuson backs this bare-tool backpack converter with a 2-Year limited warranty covering the chassis, inverter electronics, and harness assembly. The factory carton delivers the ACBe backpack converter, padded harness straps, quick-disconnect head coupler, and an illustrated technical instruction manual for immediate field setup.