Oztec Industries Concrete Vibrator Electric Motor with Quick Disconnect System 115V 17A 2.25HP

Description

A seventeen-amp electric motor pulls two-and-one-quarter horsepower from single-phase circuits to drive heavy poker heads through stiff slump mixes. The Oztec 2.25 HP Concrete Vibrator Motor connects to flexible shafts via a tool-free quick-disconnect system. It spins heads at twelve thousand VPM. This high-amperage motor trips standard fifteen-amp household breakers without delay.

High-strength cast aluminum forms the rugged motor enclosure, shielded by a tubular steel roll cage that prevents impact damage from slab drops. The universal brush motor draws seventeen full-load amps at one hundred fifteen volts single-phase, generating twelve thousand free-load RPM. Total unboxed weight equals fourteen-point-five pounds. External dimensions measure fifteen inches long by seven inches wide. Dual-stage air intake filters block airborne cement dust.

Key Features of Oztec 2.4-OZ

Commercial concrete framing contractors buy Oztec 2.4-OZ motors to consolidate footings and stem walls without motor bog down under heavy aggregate loads. Electric concrete vibrator pricing reflects the rugged cast aluminum housing and quick-disconnect collar built for harsh jobsites.

• Two-and-one-quarter horsepower motor delivers high rotational torque in low-slump concrete.
• Quick-disconnect coupling locks flexible drive shafts in place without hand tools.
• Heavy tubular steel frame acts as a carry handle and protects switch components.
• Dual air filtration design prevents fine cement dust from abrading motor copper windings.
• External brush caps allow quick inspection and brush replacement right on the jobsite.
• Double-insulated electrical construction safeguards operators on damp concrete slabs.
• Heavy-duty toggle power switch resists concrete slurry intrusion and functions with muddy gloves.

Dynamometer Stall Current Bench Testing

Bench dynamometer load testing records an operational drop from twelve thousand free RPM down to eleven thousand two hundred loaded RPM with a two-inch head in three-inch slump concrete. Continuous current draw pulls sixteen-point-five amperes under heavy mud load, demanding dedicated twenty-amp circuits. Thermal overload cutoff triggers after four minutes of sustained mechanical rotor stall, protecting motor copper windings from burnout. Internal armature shaft runout measures below one-point-five mils, minimizing drivetrain vibration transfer back through the flex shaft casing.

Jobsite Handling Maintenance Target Exclusions

Weighing fourteen-and-a-half pounds, this motor rests balanced against an operator hip, though seventeen-amp power draws require minimum twelve-gauge extension cords over fifty feet. The protected toggle switch flips on with thick rubber mud gloves. Do not buy this two-and-one-quarter horsepower motor for light mortar patch jobs or pencil heads under one inch diameter.

• Wash and dry foam air pre-filters after every twenty operating hours.
• Inspect carbon motor brushes every fifty hours and replace when worn down.
• Wipe quick-disconnect coupling splines clean before snapping flex shafts in place.

Industrial Warranty Coverage Factory Inclusions

Oztec Industries backs this electric power unit with a standard 1-Year limited industrial manufacturer warranty. The factory package contains the complete 2.4-OZ electric vibrator motor, tubular steel roll-protection bracket, an extra set of motor carbon brushes, and an official illustrated parts breakdown manual.