DEWALT 2 Inch Rubber Tip Vibrator Head with 10 Ft Shaft

Description

Epoxy-coated rebar scratches and form liner gouges ruin expensive bridge deck inspections during heavy consolidation runs. The DEWALT 2 Inch Rubber Tip Shaft cushions metal contact while transferring high vibration into stiff concrete. It features a ten-foot flex reach. The soft rubber nose cap wears out fast if dragged over rough jagged bedrock.

A steel casing with bonded elastomer nose protection shields sensitive structural steel and smooth formwork from abrasive contact. High-tensile inner core cables spin inside a thick wire-reinforced neoprene outer sheath that resists crimping. Operating under cordless commercial powerheads, this poker assembly delivers twelve thousand vibrations per minute. Total assembly weight sits at twenty-four pounds. Overall length measures one hundred twenty inches from the tool connection collar to the poker tip.

Key Features of DEWALT DCPS3503RT

Bridge deck contractors buy DEWALT DCPS3503RT shafts to consolidate structural pours without scratching protective rebar coatings. Commercial concrete vibrator shaft pricing accounts for the durable vulcanized rubber tip that prevents jobsite inspection rejections.

• Vulcanized rubber nose cap protects epoxy rebar coatings from surface scratching during vibration.
• Two-inch head diameter moves heavy aggregate mixes in deep commercial slabs.
• Ten-foot flexible shaft reach maneuvers through complex reinforcing bar grids on elevated decks.
• Quick-release connection collar mounts to cordless powerheads without using hand wrenches.
• Wire-braided outer casing stops sharp tie wire ends from puncturing the internal drive.
• High-frequency eccentric weight forces trapped air pockets to the top of the pour.
• Sealed bearing assembly resists slurry intrusion to extend internal head lifespan.

Shaft Deflection Vibration Bench Metrics

Bench dynamometer evaluations show head rotation maintains eleven thousand four hundred vibrations per minute under full five-inch slump load. Flexible core torsional deflection remains below three degrees per linear foot across the ten-foot length under maximum immersion drag. Bearing operating temperatures top out at one hundred sixty degrees Fahrenheit after forty-five minutes of continuous mud cycling. Rubber tip bond strength withstands one hundred fifty pounds of shear friction force before showing separation from the internal steel head housing.

Handling Rigidity Field Usability Limits

The ten-foot shaft length coils into a five-foot loop for transport, though cold morning weather increases casing stiffness. Grip balance holds firm near the quick-attach coupler with wet work gloves. Do not buy this two-inch rubber-tipped head for thin architectural topping slabs under three inches thick or narrow block wall cores.

• Wash wet concrete paste off the outer casing before slurry hardens on site.
• Inspect the rubber nose tip for gouges or tears prior to every pour.
• Lubricate inner flexible core wire with dedicated flex shaft grease every fifty hours.

Industrial Warranty Coverage Factory Inclusions

DEWALT protects this vibrator shaft assembly with a standard 3-Year limited commercial warranty. The shipping container delivers the complete ten-foot flexible shaft, integrated two-inch rubber-tipped poker head, protective quick-connect collar cap, and factory instruction documentation.