Milwaukee MX FUEL 14inch Cut-Off Saw Kit with 2 Batteries

Description

Pipe crews face dangerous exhaust fumes and flooded carburetors inside trench boxes, so grab the Milwaukee MX FUEL Cut-Off Saw Kit. This cordless handheld saw spins fourteen-inch diamond blades to plunge five inches deep without gas headaches. A brushless motor delivers gas-equivalent speed. You must recharge the REDLITHIUM batteries between heavy cutting cycles.

Milwaukee builds the powerhead with a cast magnesium gearcase bolted to an impact-resistant composite motor housing. The POWERSTATE brushless electric motor draws high current from 72V MX FUEL lithium-ion battery packs, driving the one-inch arbor at 5350 RPM. Machine weight registers at 21.6 lbs with battery attached. Physical tool dimensions measure 31 inches long by 12 inches wide by 15 inches high.

Key Features of Milwaukee MX FUEL

Utility pipelayers buy Milwaukee MX FUEL cut-off saw kits to eliminate gas storage hazards while evaluating pro equipment pricing. Trench workers cut ductile iron, PVC pipe, and cured concrete without pulling stubborn recoil starter cords.

• POWERSTATE brushless motor delivers five inches of plunge cut depth without exhaust fumes.
• Push-button start eliminates shoulder strain and stubborn cold-weather pull cords forever.
• Onboard water connection with brass flow valve suppresses silica dust during wet cuts.
• Rapid stop blade brake halts fourteen-inch wheel rotation within three seconds of trigger release.
• ONE-KEY digital tracking provides tool location records and remote inventory security controls.
• Reversible blade arm allows flush cuts along ditch walls, curbs, and tight footings.
• Cast aluminum front handle provides multi-position control for horizontal and vertical plunge cuts.

Blade Brake Motor Dynamic Tolerances

Bench load testing proves high dynamic torque and rapid electronic braking action. The 72V brushless motor draws 6.8 amps free spin, climbing to 34 amps under heavy plunge cuts through four-inch ductile iron water pipe. Spindle runout measures under 0.0014 inches TIR at the blade clamping flange. The electronic brake stops a full-speed fourteen-inch abrasive wheel in 2.8 seconds flat. Electronics module temperatures plateau at 126 degrees Fahrenheit after three consecutive battery discharge cycles under heavy cutting load.

Trench Cutting Ergonomics Maintenance Scope

Swinging this twenty-two-pound cordless saw into muddy pipe ditches feels balanced, with large rubber grip zones accommodating bulky lineman gloves. The instant push-button start speeds pipe repairs. Do not buy this battery saw for all-day highway road sawing or long continuous slab demolition projects.

• Blow fine stone and metal dust out of the battery dock after each shift.
• Check drive belt tension through the inspection window every twenty operating hours.
• Flush the water delivery tubes with clean water after finishing wet cuts.

Factory Warranty Manifest Packaging Terms

Milwaukee covers the MX FUEL cut-off saw with a 2-Year commercial manufacturer warranty. The factory package contains the MXF314 cut-off saw bare tool, two MX FUEL XC406 battery packs, one MX FUEL charger, quick-connect water coupling, contractor bag, and the printed tool operator instruction manual.